Just creating a log for making 3D printed KeypadLinc Buttons.

I will share the Fusion 360 model and Super Slicer settings if I get something I like. 

Ok printed a first model. 

Obviously .4 mm nozzle does not have the resolution. I think I have a few smaller .2 ones laying around, may need .1 mm to get the text right. I also tried to match the text exactly, which may not be the best option.

The color isn't terrible.

My first layer is way too smushed considering prints are just a few layers. This thing has elephant foot for days. I would like to see if I can get some prettier path lines on the front too. The size overall is decent, but it doesn't clip in as the back is not the right proportions yet. Seems very doable though. 

This would be the text sliced at .1 mm nozzle. It looks ok, just needs some clean up on the character spacing.

 

Would you upload the .STL file for us to play with? It would be nice if it were blank also, i.e. no imbedded text.

Also is your white filament translucent enough for the light to come through? I wasn't sure if it needed a special translucent filament or not.

Edited August 4, 20232 yr by LFMc

I would also love the .stl or fusion file if you are using fusion. I feel like other than the resolution/cosmetics the biggest challenge might be the clips that lock the keys in place.