rdcole Posted October 31, 2010 Share Posted October 31, 2010 This last week the ISY-99 quit talking to the Insteion Network. When I login via the administrative console I get a bunch of communications errors and all of the Programs in the ISY are missing. If I unplug the PLM and plug it back in I see the usually Power one Reset LED behavior of the ISY with a couple of RX/TX Flashes then nothing. Just a Power LED. I think I should be seeing regular RX/TX activity in sync with Insteion activity. If I switch lights on and off with the RemoteLinc I see LED activity on the PLM but nothing on the RX/TX Lights of the ISY. I tried replacing the cable between the PLM and ISY with no effect. Could this be another Failed PLM? Ron Link to comment Share on other sites More sharing options...
Brian H Posted October 31, 2010 Share Posted October 31, 2010 In the diagnostics test area. What does the PLM Info/Status choice show? Should say connected and give the PLMs firmware revision and its address. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.