jcthorne Posted December 17, 2007 Share Posted December 17, 2007 Is there a way via software command ect to find the PLM version number and how many links it currently has stored. Would like to know if I am approaching the 417 limit. Link to comment Share on other sites More sharing options...
Mark Sanctuary Posted December 17, 2007 Share Posted December 17, 2007 I think that is coming on a newer version of the plm, but from what I understand the current PLM does not have a command to do that. Link to comment Share on other sites More sharing options...
Michel Kohanim Posted December 17, 2007 Share Posted December 17, 2007 jcthorne, In our diagnostics release (2.7/8) we are going to have this feature. With kind regards, Michel Is there a way via software command ect to find the PLM version number and how many links it currently has stored. Would like to know if I am approaching the 417 limit. Link to comment Share on other sites More sharing options...
Brian H Posted December 17, 2007 Share Posted December 17, 2007 The number of links maybe a problem. The version number use to be on a sticker on the rear of the unit. I understand that maybe not the case any more. You could use BusyRats PLM test and a serial port on your computer to send the 'Get IM Info' command to read the firmware revision and a few other bits of information. I don't see any Link Database % of full command. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.