ELA Posted January 6, 2011 Share Posted January 6, 2011 I am using an ISY99I program to detect a key push in order to active the program sequence. The program uses "if control = ON" to activate. I works fine for me but is failing to operate for others in the household. What I have found is that the others often hold the key too long and it sends a "%On" that is then less than 100% and the program then does not detect it. I have told others not to hold the key, instead only push it briefly. I would still like to make the program more robust. Can anyone suggest a method to have it detect regardless of the on percentage (how long the button is held).? I do not need the "dim feature" for this key. I understand that the "if status is <> %" can be used but I do not want the program to be re-entrant. Anyone have a proven method for this? Link to comment Share on other sites More sharing options...
Sub-Routine Posted January 6, 2011 Share Posted January 6, 2011 Hi ELA, Something like this should work: If Control 'Basement / Basement Lights Indicator' is switched On Or Control 'Basement / Basement Lights Indicator' is switched Fast On Or Control 'Basement / Basement Lights Indicator' is switched Fade Up Then ... Rand Link to comment Share on other sites More sharing options...
ELA Posted January 6, 2011 Author Share Posted January 6, 2011 Thanks for your response Sub-Routine, I will try adding the check for the "fade up". That makes perfect sense. I appreciate your help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.