gadgetfreak Posted February 20, 2011 Share Posted February 20, 2011 I created a scene with three switches: One goes on 100%, one goes to 50% and one to go off. So all three lights are activated in the same scene. When I add that scene to a program, should the scene be set to on or off? And, if you tell me "on" (to actually "run" the scene), what would "off" do? Thanks. Link to comment
Goose66 Posted February 20, 2011 Share Posted February 20, 2011 Setting the scene ON turns on all devices to their preset ON levels and preset ramp rates. Setting the scene OFF turns off all devices. Link to comment
gadgetfreak Posted February 20, 2011 Author Share Posted February 20, 2011 Thanks for the reply. So in my case, I would set the program to turn ON the scene which would set light 1 to 100%, light 2 to 50% and light 3 to 0% (which is the same as off)? And I would set the scene to off if I want all 3 lights to go off? Thanks again. Link to comment
oberkc Posted February 20, 2011 Share Posted February 20, 2011 So in my case, I would set the program to turn ON the scene which would set light 1 to 100%, light 2 to 50% and light 3 to 0% (which is the same as off)? Yes. In this case your "on" levels for that scene would be 100%, 50%, and 0%. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.