I am still having Insteon issues, running 2.8.6 firmware on ISY.

 

I started a reconfigure devices option on the ISY99. It completed two of the devices (icon changed from green arrow to light bulb/other icons), but has not made any more progress after 30 minutes. If I look at the event log (below), the last few lines listed repeat over and over.

 

I suspect one device is having trouble being configured. Can I reset this process? Do I delete the troublesome device? Any thoughts are appreciated.

 

 

 

 

Sat 09/03/2011 05:19:28 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Sat 09/03/2011 05:19:28 PM : [ Time] 17:19:29 0(0)

Sat 09/03/2011 05:19:28 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:28 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Sat 09/03/2011 05:19:29 PM : [ Time] 17:19:29 0(0)

Sat 09/03/2011 05:19:29 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:29 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Sat 09/03/2011 05:19:29 PM : [ Time] 17:19:30 0(0)

Sat 09/03/2011 05:19:29 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:29 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Sat 09/03/2011 05:19:30 PM : [ Time] 17:19:30 0(0)

Sat 09/03/2011 05:19:30 PM : [iNST-ACK ] 02 62 0B.F9.F7 0F 28 0F 06 SET-MSB(0F)

Sat 09/03/2011 05:19:30 PM : [iNST-SRX ] 02 50 0B.F9.F7 14.84.DE 27 28 0F SET-MSB(0F)

Sat 09/03/2011 05:19:30 PM : [standard-Direct Ack][0B.F9.F7-->ISY/PLM Group=0] Max Hops=3, Hops Left=1

Sat 09/03/2011 05:19:30 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:30 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11

Sat 09/03/2011 05:19:30 PM : [b F9 F7 1 ] Link 0 : 0FF8 [A2001484DEFF1F00] *Failed Writing [A2001484DEFF1F00]

Sat 09/03/2011 05:19:31 PM : [ Time] 17:19:31 0(0)

Sat 09/03/2011 05:19:31 PM : [iNST-ACK ] 02 62 0B.F9.F7 0F 2B F8 06 PEEK (F8)

Sat 09/03/2011 05:19:31 PM : [iNST-SRX ] 02 50 0B.F9.F7 14.84.DE 27 2B A2 PEEK (A2)

Sat 09/03/2011 05:19:31 PM : [standard-Direct Ack][0B.F9.F7-->ISY/PLM Group=0] Max Hops=3, Hops Left=1

Sat 09/03/2011 05:19:31 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:32 PM : [ Time] 17:19:32 0(0)

Sat 09/03/2011 05:19:32 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

Sat 09/03/2011 05:19:32 PM : [ Time] 17:19:33 0(0)

Sat 09/03/2011 05:19:32 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

gakran

 

If the post was not a finger check and the ISY is at 2.8.6 move to 2.8.16.

 

It looks like a Program is running in a loop. A Scene is repeatly being turned On.

 

Sat 09/03/2011 05:19:28 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)

 

This is interferring with the update. Disable all the Programs and see if that helps.

 

Lee

Yes, that should read 2.8.16. There was a program running, but after stopping it the ISY was still behaving worse and worse. I reformatted the SD card, restored, re-configured all devices and everything seems fine now.

 

I did notice one loss of communication message, that recovered on the next try. I may have to reposition one of the access points.

 

Thanks for the help.

Yes, that should read 2.8.16. There was a program running, but after stopping it the ISY was still behaving worse and worse. I reformatted the SD card, restored, re-configured all devices and everything seems fine now.

 

I did notice one loss of communication message, that recovered on the next try. I may have to reposition one of the access points.

 

Thanks for the help.