gatchel Posted January 22, 2012 Share Posted January 22, 2012 Do the newer lamplincs / appliancelincs allow the local load sense to control a scene? I know older units were only responders but can the newer ones be controllers also? I checked the manual on the SH website and didn't see any reference to this. Thanks Link to comment Share on other sites More sharing options...
Teken Posted January 22, 2012 Share Posted January 22, 2012 I can't speak to the load sense portion as I have not used it. But, can affirm that the new dual band lamplinc does indeed show up as controller / responder in the ISY platform. Teken . . . Link to comment Share on other sites More sharing options...
Brian H Posted January 22, 2012 Share Posted January 22, 2012 I have not seen anything on ApplianceLincs. I can say my LampLinc Hardware 4.3 firmware v.33 does show up in My Lighting with Is a Responder to and a Controller for listing. I did a test with the LampLinc. Linked it to an ApplianceLinc as a controller. When I turned the light switch Off the ApplianceLinc also went Off. When I the turned the local light switch On. The ApplianceLinc also went back On. Link to comment Share on other sites More sharing options...
gatchel Posted January 22, 2012 Author Share Posted January 22, 2012 Sweet. Thanks for the follow up posts and feedback. Brian, Thanks for the test, I do appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.