mlvarnell Posted February 9, 2012 Posted February 9, 2012 It has just occurred to me that you could use an exterior ac outlet to broadcast an all on or all off, with a resulting trigger of your I/O Linc garage door controller! I haven't tried to prove this yet, but I will soon. Any thoughts?
LeeG Posted February 9, 2012 Posted February 9, 2012 Only if the Controller you plugged into the outside outlet is linked to the I/O Linc Relay. All On/All Off uses a special Scene (Group) number but the responder (I/O Linc Relay) must have a responder link record for the Controller sending the All On/All Off.
gatchel Posted February 10, 2012 Posted February 10, 2012 This really only applies to Remotelinc's and controllinc's, right?
LeeG Posted February 10, 2012 Posted February 10, 2012 They are the only devices I am aware of that have All On/Aff buttons. Easy enough to generate an All On or All Off with some custom software and a PLM. Would not work for the same reason, the I/O Linc would not have a responder link for the Controller (PLM).
mlvarnell Posted February 10, 2012 Author Posted February 10, 2012 sorry for the fuss, but thanks for the info! I still have a lot to learn...
Recommended Posts