Teken Posted March 10, 2012 Posted March 10, 2012 Late last year I was in the mist of incorporating the last pieces of home automation with respect to water safety and awareness to my home. One of the key elements in my home is having the ability to turn off all water supplies to specific appliances through out the home. Many of you have more than likely experienced some sort of water damage in your time. Having experienced many of the same in previous homes I was determined to never endure the same fate again! Below is a link to several video's of how I have incorporated the ISY-99i Pro platform into my Home Automation System. One of the key elements was having the ability to turn off a device when the presence of water was detected. This was done to ensure that electricity was not present while standing water was in the immediate area. I was very surprised, and aggravated to find out that there was no physical way, or method to program the Triggerlinc and the Appliancelinc to send a alert message, and at the same time turn off the Appliancelink! If it was not for the power and flexibility of the ISY to allow the user to taylor and customize the on / off conditions for an alert. This automated water system would only serve to turn off the water supply, but not have the ability to alert the user of the water event. So as I have stated many times in the past to all those who have asked. The UDI ISY-99i Pro is the single best investment in all aspects of the word. Teken . . .
Recommended Posts