Shawn Aruch Posted March 17, 2012 Share Posted March 17, 2012 Hi, I have a Venstar thermostat with the Insteon module and a 99i. What I'd like to do is have a program that when the heat / cool of the thermostat goes off (temp has been reached) the fan then comes back on for 15 minutes to help even the temperature around my house. This will be my first program with the 99i, so I'm not sure where to start. Thanks in advance, Shawn Link to comment
andyf0 Posted March 17, 2012 Share Posted March 17, 2012 This will work for heat. You can add another one for cool. This will wait 1 1/2 mins after heat comes on before fan comes on (don't like blowing cool air). This will continue to run fan for 15 mins after heat is off. If Control 'DEVICES / THERMOSTATS / HU TS (Heat Control)' is switched On And Control 'DEVICES / THERMOSTATS / HU TS (Heat Control)' is not switched Off Then Wait 1 minute and 30 seconds Set Scene 'LIVING ROOM / LR Ceiling Fan' On Else Wait 15 minutes Set Scene 'LIVING ROOM / LR Ceiling Fan' Off Link to comment
Shawn Aruch Posted March 17, 2012 Author Share Posted March 17, 2012 It isn't a separate fan, but rather the blower on the central air / heat unit. This is what I came up with and seems to work ok. If Control '14.21.07 - Heat Control' is switched Off Or Control '14.21.07 - Cool Control' is switched Off Then Wait 1 minute Set '14.21.07 - Main' Fan On Send Notification to 'Default' content 'Fan On' Wait 15 minutes Set '14.21.07 - Main' Fan Auto Send Notification to 'Default' content 'Fan Off' Else - No Actions - (To add one, press 'Action') Looks to be working ok for now. Thanks, Shawn Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.