flemingmike Posted April 11, 2012 Posted April 11, 2012 Hello, In order for 2 switches to be both controllers and responders do I just make 2 scenes?
LeeG Posted April 11, 2012 Posted April 11, 2012 Use one ISY Scene. Add both switches as Controllers of the one ISY Scene. The ISY assumes a Controller is also a Responder and will cross-liink the devices.
flemingmike Posted April 11, 2012 Author Posted April 11, 2012 i tried that. i guess because one of the devices is an inline dimmer it is only a responder.
LeeG Posted April 11, 2012 Posted April 11, 2012 Unless it is an InLineLinc w/sense it is a Responder only. It can be controlled by the other switch but itself cannot control another Insteon device. One ISY Scene, switch as Controller, InLineLinc as Responder.
Recommended Posts