morgan4x4 Posted February 10, 2008 Share Posted February 10, 2008 Need some help configring scenes controled by 2, 6 Key KPL's. I have 4 kitchen scenes (Scene A - Scene D), controlled by 2 KPLs. The scenes operate correctly from both sources, except the scene states (as noted by the led) do not sync. Each scene is configured as follows: Both KPLS in AToggle Mode Within each Scene, the corresponding Scene Key are linked as CONTROLLERS on both KPLs All other KPL buttons configured as RESPONDERS within Scene (on both KPLs) All Buttons (Main, A-D) are in Mutual Exclusive Group Neither KPL has a load attached. Help appreciated! ps Using ISY-99i - IR PRO to configure. Link to comment
Sub-Routine Posted February 10, 2008 Share Posted February 10, 2008 All other KPL buttons configured as RESPONDERS within Scene (on both KPLs) I don't think that is correct. Try deleting all the buttons other than the controllers. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.