Problems adding Switchlinc On/Off 2476S

[wuench]

I have having trouble add a newly installed switch to the ISY. The device is mounted with Switchlinc Dimmer dual-band and I have been able to link it to a keypad manually. I am curious about the NAK in the log. Is this just an indication of communication issues?

 

Switchlinc On/Off 2476S v6.0 1214.

ISY Firmware 3.2.6

 

Log:

 

Sun 10/28/2012 02:46:28 PM : ---- Initializing the linked devices ----
Sun 10/28/2012 02:46:28 PM : ---- All Linked Devices are now initialized ----
Sun 10/28/2012 02:46:28 PM : ---- Add remaining devices ----
Sun 10/28/2012 02:46:28 PM : [iNST-TX-I1  ] 02 62 xx xx xx 0F 0D 00
Sun 10/28/2012 02:46:28 PM : [iNST-ACK    ] 02 62 xx xx xx 0F 0D 00 06                 (00)
Sun 10/28/2012 02:46:29 PM : [iNST-SRX    ] 02 50 xx xx xx yy yy yy A7 0D FF           (FF)
Sun 10/28/2012 02:46:29 PM : [standard-Direct Nack][xx xx xx-->ISY/PLM Group=0] Max Hops=3, Hops Left=1
Sun 10/28/2012 02:46:29 PM : [iNST-TX-I2CS] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6
Sun 10/28/2012 02:46:29 PM : [iNST-ACK    ] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6 06 LNK-ON (01
Sun 10/28/2012 02:46:38 PM : [iNST-TX-I2CS] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6
Sun 10/28/2012 02:46:38 PM : [iNST-ACK    ] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6 06 LNK-ON (01)
Sun 10/28/2012 02:46:47 PM : [iNST-TX-I2CS] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6
Sun 10/28/2012 02:46:47 PM : [iNST-ACK    ] 02 62 xx xx xx 1F 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 F6 06 LNK-ON (01)
Sun 10/28/2012 02:46:51 PM : ---- All Remaining Device Added ----
Sun 10/28/2012 02:46:51 PM : [All         ] Writing 0 bytes to devices
Sun 10/28/2012 02:49:27 PM : [        Time] 14:49:27 0(0)

[LeeG]

The ISY is not reacting to the fact that the SwitchLinc is an I2CS device. Suggest updating to the 3.3.3 Beta.

[wuench]

I was able to finally get it added. Not sure what was the magic bullet, I moved an AccessPoint onto that circuit and the ISY locked up at one point, so I rebooted it. After that I got the device added ok, but communication with it and the dimmer in the same box are very flaky. I'll look into the latest beta, thanks...