Jim P

Did all that.. I have not set a ZW device back to factory defaults yet, but I want to wait untill I have this issue fixed before I do that to my installed light switches...

It came with current firmware.

I added this module.. I tried adding a Z-Wave light switch with no results.. I tried removing the first module and it removed. I Added the first module again. I tried a different modue with no results. The plug in modules are added very close to Z-Wave dongle.. I move the one that is added about 15 feet away and it responds to the ISY commands and I can remove it and readd it from it's normal location.. Perhaps there is something still in working stage.. although I have not read about anyone else having these issues.

If I try to remove Z-Wave devices I get similar results.. Listening for Z-Wave devices and no response. 3 quick presses and buton begins to blink rapidly.

ZW39 Eva Logik Z-Wave Smart Plug (Dimmer) Menu Z-Wave Add a Z-Wave Device BTW.. I have not been able to add any Z-wave devices .

I Can't seem to add any Z-wave devices to ISY on Polisy .. ( Yellow Cap Z-Wave Dongle ) (Z-Wave device is 5 feet from dongle) Fri 02/25/2022 07:19:19 AM : [ZWAVE-TX-NR ] [0105004AC1F081] REQ ZW_ADD_NODE_TO_NETWORK Fri 02/25/2022 07:19:19 AM : Listening for Z-Wave devices to add to the network Fri 02/25/2022 07:19:25 AM : [ZWAVE-TX-NR ] [0105004A85F1C4] REQ ZW_ADD_NODE_TO_NETWORK Fri 02/25/2022 07:19:25 AM : Adding Z-Wave devices stopped Fri 02/25/2022 07:19:25 AM : [ZWAVE-TX ] [01030020DC] REQ MEMORY_GET_ID Fri 02/25/2022 07:19:25 AM : [ZWAVE-TX ] [01030056AA] REQ ZW_GET_SUC_NODE_ID Fri 02/25/2022 07:19:25 AM : [ZWAVE-TX ] [01030002FE] REQ SERIAL_API_GET_INIT_DATA Fri 02/25/2022 07:19:26 AM : [ZWAVE-TX ] [01030005F9] REQ ZW_GET_CONTROLLER_CAPABILITIES Fri 02/25/2022 07:19:26 AM : [ZWAVE-TX-NR ] [0105004A850035] REQ ZW_ADD_NODE_TO_NETWORK Fri 02/25/2022 07:19:39 AM : [ Time] 07:19:41 0(0)

Just so I am clear if I go to this setting should a dialog open with the ability to change settings?

I assume the ' Please wait,' message simply does not refresh ?

How long should I wait on this screen? It never seems to update after I select polisy configuration...

From an email notification about the PGC issues: We do apologize for the inconvenience and appreciate your patience. In the meantime, if you already have a Polisy - with the exception of Ring and Sonos - all other node servers are already supported in Polisy. Ring and Sonos are being ported as we speak.

I have an email notification that I created early on that is sent to my email address that works fine. My email shows this in the displayed header " what I see when looking at a list of new emails" (not the source code info) like this; Subject Correspondents Date Garage Alert ISY MYHOUSE 01/04/2022, 2:42 PM While an email notification that I just created is displayed like this: Arrival Set jim@mydomain 01/04/2022, 3:40 PM My email settings on ISY are the same settings for all emails. My Subject lines are blank in each separate customized notification message: I have tried using ISY MYHOME:name@mydomain.com in the subject line of the customization as well.. This one has me baffled ... Unless your curious don't spend any more time on this.. as I have created an email forward address ISY@mydomain.com so now my email will filter my email properly now... Thanks for the look see... I can't see why it is different based on either the number of custom emails I have or simply the time frame of when I created them... maybe something change after v4 ?

My email program has filters set to store my ISY notifications in an ISY folder... otherwise this isn't an issue.. I just can't see why it works differently for email notifications all using the same email settings.

I have 20 or so email notifications. I have some older ones that are received by my computer with an address like this: From Me <mymail address Subject ISY Test To Me <mymail address.. With the email setting like this: Custom Notification 'Garage Notice' [1] From blank Subject Garage Alert Body Garage Door is OPEN !!! I also have one I just created with the following... From blank Subject Arrival Set - ${sys.program.#.name} Body Testing New Arrival Set My email receives this like this: My email list shows Subject Arrival - Set - ArrivalDepeartureSet With the Correspondents myemail.domainname The older one from above Subject ISY Test With the Correspondents ISY MYHOUSE My email server settings on ISY are: SMTP Server myisp smtp.server.com User ID myemail address From* ISY MYHOME:myemailaddress So what is going on.. the same settings for both emails with different from receipts.

Thanks for the explanation !!!

Why does ISY FINDER : Not Found show even when it does find it?