Mike Ippolito

Try the ecolink, it uses a lithium battery with 2-10 year life.

Ironically it sounds a lot like my kids Sorry for brevity - posted using mobile Tapatalk

In addition, look for snapswitch on the windows App Store. Sorry for brevity - posted using mobile Tapatalk

Personally I prefer: If From Sunset To Sunrise (next day) And Status 'Rear Porch Motion Sensor-Sens' is On Then Run Program 'Rear Motion Sensor Sched' (Then) Else - No Actions - (To add one, press 'Action') Rear Motion Sensor Sched - [iD 0005][Parent 0001] If (nothing is in IF) Then Set 'Rear Porch Light' On Wait 5 Minutes Set 'Rear Porch Light' Off Else - No Actions - (To add one, press 'Action')

Are your variables state or integer? You need to use state variables to trigger programs. Sorry for brevity - posted using mobile Tapatalk

Yes, in our notification email that was sent out. Please subscribe to our notifications to ensure you get these! ISY994i Series Firmware Release Notification ISY994i Series Firmware v4.2.30 (Final) Is Now Available After many minor releases we are pleased to announce our newest firmware has been released to production. A list of some of the newest features: SSLv3 removed - TLS 1.1 now default! - We've removed support for SSL v3 due to worldwide vulnerabilities exposed by POODLE. In addition we've made TLS 1.1 now standard on all ISY's to give you excellent security out of the box. Support for many new INSTEON devices and enhanced support for INSTEON battery devices. Literally hundreds of modifications to our AMI meter framework to give robust and accurate reading when using our ZigBee SEP Series. Z-Wave Backup & Restore. Enhanced Scenes capabilities allowing you to mix Z-Wave and Insteon Devices Support for our relay controller for OpenADR and Demand Response Head over to our forum for installation instructions. IMPORTANT: Starting with 4.0.x releases, we had to stop further firmware releases for ISY99i Series. What's on the 2015 firmware Roadmap? Our 5.0 release is almost ready! It features our highly anticipated "Virtual Nodes" and enhanced variables support. Integrate IP gateways, IoT devices and much more with full programs and variables support. The team is putting the final touches on it, and our alpha / beta cycle will start very soon. Developers and hardware manufacturers interested in providing support please contact us for an early sneak peek at this amazing new feature set. This represents an entirely new way to look at device relationships and is almost an entirely new software stack! For the less adventurous we'll also continue to release along our 4.x path. This will provide some of the new features such as variable support in programs and network resources, faster security layers, and additional device support - but it retains the full certified software stack for OpenADR and hardware devices such as Z-Wave. This release path will provide long term support and low risk updates for deployed devices using these certified software stacks. Twitter Support Twitter Updates Our Forum Submit a Ticket Wiki

Oberkc - please remove the sensor and add it again CLOSER to the ISY. If an Insteon device reports v0.0 instead of a real version number it has not added properly.

Actually after thinking about it you don't need three programs just two. The first program is if motion one or motion two then, call the then of the next program. But you might want a third program to turn off the lights after X +2 minutes if on. This way if the lights are manually turned on and the motion is not triggered they will turn off. Sorry for brevity - posted using mobile Tapatalk

Love the spelling error (lol) moron sensors are truly what I call them sometimes!! Try this: Three programs Two if motions for each of the sensors that point to the THEN of: Third program: If (leave blank) Turn light on Wait x minutes Turn light off Sorry for brevity - posted using mobile Tapatalk

I would recommend you look at the RCS PMC40-ZW or PMC30-ZW, not sure if you have Z-Wave installed but it is worth it to add if you don't. Z-Wave is superior for energy monitoring and this relay with energy monitoring does the job really well. It can be used with 120v loads or 240v loads and gives you accurate readout of energy usage with 1% accuracy. If you're using it to trigger the load on the condenser, make sure you use the PMC40 as it is rated for 40Amps.

Try to test by right clicking on the program and select "Run Then" to see if it shows up with/without delay. If you really need something to show up quickly, I'd recommend you look into push notifications.

Alan, Thanks for sharing, no apology needed for the length - it's a fantastic story. The combination of ELK M1 and ISY does truly provide for limitless possibilities as you shared with us. While it sounds like you are well on your way to making your home safe and comfortable for you and your family, please know that we're here to assist if you run into situations you'd like to automate but need a little help sketching it out. Lastly, and certainly not least, I am humbled that we play a large part in assisting you to provide an environment safe enough for your mother in law to stay with family in this challenging time of her life.

We're looking for stories and pictures to share with the media about our happy ISY users! In the upcoming months you'll start to see more press around the ISY.. and we'd like you to be a part of it! Please send me a quick synopsis of your installation and perhaps a photo or two of your happy household. If there's a good place for it, I'll contact you to see if you want to be featured in our upcoming press! Feel free to post here if you'd like otherwise send me an email directly at mike@universal-devices.com

Please contact support ( support@universal-devices.com ) so we can (privately) look up the issue. Send us the full URL that is displayed when you go to the store.

Scyto, There is currently no "retail" version of the portal by VantagePoint.