k7zpj

No issues with update from 2.8.13 to 2.8.14

I have upgraded to 2.8.13 and all of my programs that use an offset from sunrise or sunset are working as expected.

Install went fine. So far no issues.

Installed with no issues.

Hi Michel, I changed my email settings as you requested and tried testing email again. I am still getting the Mail Server Failure [Password not accepted] error message. Regards, Bruce

I am having the same issue with 2.8.6 and gmail failing with the message: Mail Server Failure [Password not accepted] I verified that I could access gmail from my computer using the same user name and password that is configured in the isy Regards, Bruce

Installed with no issues. Regards, Bruce

Installed with no issues. So far everything appears to be working as expected.

Michel, I upgraded from 2.8.3 to 2.8.4 with no issues with the installation process. However, I am also having the issue with the Program Summary and Program Details pages being blank and I am unable to access the programs. Regards, Bruce (K7ZPJ) System Configuration Intel Core i7 Win 7 64 bit Java 1.6.0_21

Hi Michel, I had a minor issue when upgrading the firmware in my isy-99 from 2.8.1 Beta to 2.8.2 Beta. The small window with the message "Please Reopen your Browser" didn't close at the end of the upgrade. After waiting a few minutes I tried to close it but was unable to get focus on the window to close it. I ended up going into task manager/applciations tab and ending the task for the admin Window. I then cleared the Java cache and reopened the browser and the isy-99 seemed to be functioning normally. My system configuration: Win 7 X64 IE8 32 bit Java build 1.6.0_21-b06 Regards Bruce Powell [/img]

Installation completed with no issues. Everything seems to be running fine.

Hi JFW, I am using a D-link DAP-1522 Wifi bridge to connect the ISY-99 to my house Wifi network. Regards, Bruce -- K7ZPJ

No issues with the install.

The orginal switch settings, were all off and I was unable to get the node address to work in a program. I don't know if it was working in a scene since all of my switches for the outdoor lights are X-10. I unlinked the EZSnsRF and did a factory reset on it. I then changed switch #1 to on. I then used the isy-99 to relink the EZSnsRF and then my program started with the PIR. One other change I made was to set the internal timer on the EZSnsRF to 30 seconds to eliminate a lot of repeated status changes. When I got it working, I stop playing with it since I didn't want to make it not work. So I have 3 changes that were made once so I can't absolutely say it was the address change that made it work. Later on I added EZLQD sensor to the EZSnsRF and have it working in a program also. One observation is that the range for the EZSnsRF drops significantly when its signals goes through walls. I ended up starting with the PIR really close to the EZSnsRF and then tested to see if the program worked. I then I moved it a few feet away and tested again. I repeated the process until the program stopped working so that I could determine the range and any dead spots. Hope this helps.

To get my EZSnsRF working with the WMT-3000 PIR, I ended up doing a factory reset on the and EZSnsRF and setting the address switches on the WMT-3000 to something other than zero. I changed the dip switches so that the node address ends in 1. I am sucessfully using the EZSnsRF/WMT-3000 in a program to control my outside lights. Regards, Bruce

Hi Michel, I have sent the zip file containing the SD card contents. I am not sure of the size limits that my ISP puts on email attachments. So please confirm when you have received it. Regards, Bruce

Hi Michel, When I cleared the log right after I noticed that nothing was being logged, the log went from 41833 lines to 9102 lines. As per your instructions, I cleared the log again and did the right click on Network/Query twice. Then after a few minutes, I checked the log and found that no new entries were added to the log and the log is still at 9102 lines. I am using tools/log to write the log out to a .txt file to check it. Regards, Bruce

After upgrading from 2.7.13 to 2.7.14RC1, my isy-99 has stopped writing to the log. It has gone a couple of days now without any log entries. I tried clearing the log but only a portion of the log was cleared. Any ideas? --Bruce