firstone

Here are the steps to install add on polisy: 1. Get shell access to polisy. If you have linux or os x based system, you'd do: ssh -ladmin polisy If you have windows, you'd have to use something like putty. I can't help you there but you'd connect to polisy IP address and port 22 with username and password (admin/admin, if you haven't changed it). 2. Run the following commands: sudo pkg update sudo pkg install android-tools-adb Once adb is installed, follow direction for enabling it on shield. You'd need to enable remote debugging and allow connection first time adb is trying to connect.

I'll walk you through once I receive my Polisy.

Shield (and android TV) is not very friendly to 3rd party development. It's different from other supported devices that only require network connection. Shield support requires "adb", which is development utility. It wouldn't be installed automatically and needs to be installed by hand using ssh or some such. Once you install adb it should start working. Feel free to PM me if you need more help.

Make sure you've used z-wave only firmware instead of default then.

Do you have PLM plugged in? I've seen that error when I've used PLM version of firmware but no PLM.

I'm also having same or similar issue. I can send commands to my 2 BE469s, such as lock and unlock, and it works and shows correct status. But then status drifts off and Query command never works. This has happened in both, 5.0.16 and 5.0.16B.

+1. Would really like a minimal nice looking UI with the cost that doesn't go to photoshop or netflix territory.

Wouldn't it be as simple as releasing "Direct" version without In-App purchases?

I have and verified that all ISY applets went into deleted category after.

Unfortunately, resetting cache didn't help. Same message.

I have factory reset card multiple times and I have factory reset module multiple times. I'm using z-wave card that came with ISY. I'm assuming it's z-wave+ since it came directly from UDI and that's what's listed. Will try to reset java cache.

No, it's a plug-in dimmer. I've used it with ISY successfully before but now have moved and have new clean ISY.

It's Leviton Vizia plugin (VRC0P) that I'm usually using to extend network for z-wave locks. It's plugged in 1 foot away from ISY. Firmware 5.0.16. Using admin console. From the logs it seems like it's not specifically a z-wave issue. Seems like it's actually added to z-wave but rather cannot be added to ISY. I might be wrong.

Having an issue adding new z-wave device. I don't have any other devices in ISY right now. Not sure if that's an issue. Tried multiple times to exclude and include. Fri 11/15/2019 11:16:16 AM : [ZWAVE-TX-NR ] [0105004AC1F988] REQ ZW_ADD_NODE_TO_NETWORK Fri 11/15/2019 11:16:16 AM : [UZW-CMD 1 ] Start Include Fri 11/15/2019 11:16:16 AM : Listening for Z-Wave devices to add to the network Fri 11/15/2019 11:16:25 AM : Z-Wave device detected, retrieving info 2 Fri 11/15/2019 11:16:25 AM : Z-Wave device detected, retrieving info 3 Fri 11/15/2019 11:16:26 AM : Z-Wave device detected, retrieving info 5 Fri 11/15/2019 11:16:26 AM : [ZWAVE-TX ] [0105004A85FACF] REQ ZW_ADD_NODE_TO_NETWORK Fri 11/15/2019 11:16:26 AM : Adding Z-Wave devices stopped Fri 11/15/2019 11:16:26 AM : [ZWAVE-TX ] [01030020DC] REQ MEMORY_GET_ID Fri 11/15/2019 11:16:26 AM : [ZWAVE-TX ] [01030002FE] REQ SERIAL_API_GET_INIT_DATA Fri 11/15/2019 11:16:27 AM : [ZWAVE-TX ] [01030005F9] REQ ZW_GET_CONTROLLER_CAPABILITIES Fri 11/15/2019 11:16:27 AM : Device 4 of type 4.17.4 included into Z-Wave network Fri 11/15/2019 11:16:27 AM : [ZWAVE-TX 4.0] [72/04] CC=0x72 cmd=0x04 [] ACK,AUTO,EXPLORE To=0x04 Fri 11/15/2019 11:16:27 AM : [ZWAVE-RX 4.0] [72/05] CC=0x72 cmd=0x05 [001D0202030B] ACK,AUTO,EXPLORE From=0x04 Fri 11/15/2019 11:16:27 AM : [ZWAVE-ADD-NODE] Cannot add primary node for 4.0 Fri 11/15/2019 11:16:27 AM : [ZWAVE-ADD-NODE] Device 4.0 not added Fri 11/15/2019 11:16:27 AM : Add Node failed: Cannot create primary node for new device

I have same one and had insteon dimmers fail or required reset after power loss a few times.

I didn't have issue with Alexa control. I've had issues with Alexa not being responsive while there's something loud playing. Not really related to ISY, harmony or anything else but Alexa itself.

I think it's mono but you can probably just take stereo as well and splice it together. As far as you needing remote, if you only using hub with Alexa, then technically you don't need a remote. With that in mind, I kind of gave up on alexa controlling AV equipment. A lot of the time it doesn't react or reacts incorrectly because of the sound of tv program. So for basic stuff like play/pause/volume it's just a lot easier to press remote button then scream the command at Alexa, sometimes several times.

You can plug output of hub into input of another IR system. You will need to use 2.5mm connector for the hub side. I've used it in that way but I don't know if it will work with every IR system.

Had there been any progress towards this? Using hints or otherwise?

Device is called "bedroom". I will try renaming it.

I have now tried everything. I've unlinked ISY (and hue), factory reset both of my minis and set them up again. I have also deleted GH app, rebooted the phone and re-installed GH app. Same behavior: I have ISY device called "bedroom", when I say "Turn on bedroom light", GH app searches web, mini says "Sorry, I don't know how to help with that".

I do not see any evidence of having multiple accounts. But, using mic in Google Home app doesn't work either. Lights work fine if I press on/off buttons. But voice commands just does web search, even though it seems to understand me correctly. I will try resetting them if there are no better suggestions.

I've configured both minis with the same GH app as linking lights. I doubt that they would get a different account from somewhere else. Is there an easy way to check? Or should I somehow reset those and try again?

Don't think so - it was configured though the same app, it shows up in the same room in the app. Does the fact that it's a mini and not larger model make a difference? I thought maybe mini just doesn't work for automation...

I feel like I'm missing something simple and obvious. I've gone though the steps of linking via app to ISY. I can control lights from the app. But if I try to use voice commands though Mini, it keeps saying "I don't know how to do it". What am I missing? I've try pressing "Send spokens" button again but that didn't fix anything.