propman07

Lee- Sorry about the confusion....I have 3 6 button KPLs, one at the Backdoor Porch, one at the Front Entryway, and one at the Master Bedroom. If I'm physically at Backdoor Porch, here is what happens. Backdoor Porch - C Pressed (lights dim); All 3 KPLs show Scene C illuminated Backdoor Porch - A Pressed (lights brighten); at the Backdoor Porch location, Scene A and C are illuminated, at the other two locations, Scene A is illuminated (results that I was looking for), and Scene C is off. Looks like the problem is at the local KPL.

LeeG- Thanks again for taking the time to reply with such a detailed solution, including the two programs. Here is what happened. Created scenes as described above (listed below). Created programs as described above (listed below). When KPL A is pressed, lights come on as expected. KPL C is pressed, lights change to different dim setting (as expected), but KPL A stays illuminated. *** NOTE *** The programs and scenes below have been corrected, and function correctly. See the last post in this thread for more information. Scene A Buttons (All as responders) Backdoor Porch - A Front Entryway - A Master Bedroom Switch - A Scene C Buttons (All as responders) Backdoor Porch - C Front Entryway - C Master Bedroom Switch - C Programs: Scene A Buttons Off If Control 'Hardware / Backdoor Porch - C' is switched On Or Control 'Hardware / Front Entryway - C' is switched On Or Control 'Hardware / Master Bedroom Switch - C' is switched On Then Wait 2 seconds Set Scene 'Scene A Butttons' Off Else - No Actions - (To add one, press 'Action') Scene C Buttons Off If Control 'Hardware / Backdoor Porch - A' is switched On Or Control 'Hardware / Front Entryway - A' is switched On Or Control 'Hardware / Master Bedroom Switch - A' is switched On Then Wait 2 seconds Set Scene 'Scene C Butttons' Off Else - No Actions - (To add one, press 'Action')

LeeG- Thanks for the reply. I'll give that a try later today.

Hello- I'm relatively new to Insteon, the ISY-99i, and programming, so I apologize in advance if this question has been answered before. I have two 6 button KPLs that I have controlling a set of lights in the living room. Button A on both KPLs turns on the lights to 100%. Button C on both KPLs is set to turn on the lights to 25%. If I press A on either keypad, the lights turn on to 100%, and both KPLs show the A button lit up. The same thing is true for the Button C option. Now....my question.... If I press Button C on one of the KPLs, the lights go on to 25%. If I want to turn the lights on to 100%, I press Button A, and the lights go on to 100%, BUT now both KPLs show Button A and Button C lit up. In this situation, I would like Button A to be lit up (the active condition), and Button C to be dim. Any help would be appreciated. Thanks.

Lee/DC- Thanks for the info. I'll be sure to follow what you guys suggested as I get started. I'm coming over from X10 devices, of which I only had about 6-7 working at any one time. I was never able to get stuff like "scenes" set up with the X10, so I am looking forward to adding that functionality with Insteon/ISY-99i. Now, if I can just get past the tricky wiring that exists in my 1950s home, I'll be all set. hahaha

Not to thread-jack....but I also am a new member. I have recently purchased a few Insteon switches, as well as the ISY-99i controller. I wanted to see if it would be advisable for me to get the ISY-99i up and running prior to installing/linking my switches. Thanks.