TMR Rudy

I think you have it. the other option I did was to create the scene at 30% which controls all 3 switches jointly. Then from the scheduled time 9-6 I added the scene to the program which is set to turn on at 30% (scene level). I then created another scheduled program from 6:01 a.m. to 8:59 p.m. to turn the scene "fast on" when a switch is triggered; thus turns light on past 30% up to 100%. (Still have to test this one). --Night Program-- If ( Control 'Main Hallway Upstairs Master' is switched On Or Control 'Main Hallway Upstairs 1' is switched On Or Control 'Main Hallway Upstairs 2' is switched On ) And From 9:00:00PM To 6:00:00AM (next day) Then Set Scene 'Main Hallway Upstairs' On <--- this scene is set at 30% Else - No Actions - (To add one, press 'Action') --Day Program-- If ( Control 'Main Hallway Upstairs Master' is switched On Or Control 'Main Hallway Upstairs 1' is switched On Or Control 'Main Hallway Upstairs 2' is switched On ) And From 6:01:00AM To 8:59:00PM (same day) Then Set Scene 'Main Hallway Upstairs' Fast On Else - No Actions - (To add one, press 'Action')

LeeG, the problem that I have is that there is a scene where I have all three switches acting as controllers of each other; this is where I can turn on/off lights at the various locations. The on level is set at 100% which is by design. Have an addition scene that would turn on the light to 30% would only create the same effect. Scene - Main Hallway Upstairs Control, would trigger first to 100% then the Scene set to control the light to 30%. Scene - Main Hallway Upstairs Control Main Hallway Master' - Located at south end of hallway Main Hallway Upstairs 1' - Located at bottom of stairs Main Hallway Upstairs 2' - Located at north end of hallway. Maybe there is no way to have this program in this situation. rudy.

LeeG the pots are controlled by 3 switches. Main Hallway Master' - Located at south end of hallway 'Main Hallway Upstairs 1' - Located at bottom of stairs 'Main Hallway Upstairs 2' - Located at north end of hallway The wall switches are connected to 1 set of upstairs pot lights.

LeeG only 1 set of pot lights are involved. It is controlled by three switches. (main hallway upstairs) has a switch downstairs; another 2 switchs at each end of the hallway on the 2nd level; hence 3 switches that control 1 set of pot lights. I missed the brackets to group the program - good catch. yes; the 3 switches are in 1 scene as controllers for each other. Rudy

LeeG. I am looking for a program that keeps the light off and if turned on manually between 9 p.m. to 6 a.m. next morning, the light will be at 30% when turned on. Currently the program works by design, however when triggered it turns on the light at 100% for a second and then dims down to 30%. I want the program to fad up to 30% and stay there until the light is turned off manually again between the times above. The reason of this program is that we keep the nursery door open to hear the baby. If we need to access the upstairs or hallway, I don't want to have a bright light shining into the room. 30% level is perfect, except now the program turns on at 100% for a split second. Thanks rudy

Copy of program (note - it's a two pole switch) as requested by Jimbo If Control 'Main Hallway Master' is switched On Or Control 'Main Hallway Upstairs 1' is switched On Or Control 'Main Hallway Upstairs 2' is switched On And From 9:00:00PM To 6:00:00AM (next day) Then Set 'Main Hallway Upstairs Master' 30% Else - No Actions - (To add one, press 'Action')

Good day everyone. I am looking for a program that between 9p.m. - 6 a.m next day will turn on my upstairs light to 30%. If I adjust the percentage through "on level" it will turn on 30% all the time. I have sent a program that sets the light to 30% during the scheduled time, however the catch is that it turns on the light to 100% first then immediately dims back down to 30%. I would like it to turn on at 30% level. Any suggestions. Thanks kindly Rudy

I have been trying to program a set of lights to turn on at 40%. The issue I am having is that they are a 3 poll switch (two switches operate one light). I am unsure where I set the on level. I have created a scene that operates the two switches (i.e. each switch is a controller). I am unsucessfly in having the lights turn on at 40%. Where I have tried this is; a) tried setting the master control switch (on level applied locally) scene name (apply changes to all devices) c) each switch within the scene Still I am unsuccessful in having the lights come on at 40% when switched on. Any other suggestions, or am I missing something. Thanks in advance. Rudy.

Thanks for the information, I'll check the site.

Good day everyone, hoping someone has a program that will silence the ELK voice prompts and chirps during morning hours. I am usually the first one out in the morning, and wanted to be able to silence the ELK voice promotes and chirps during my exit at 6 a.m. We set ELK to stay instant mode during the evening. I need a way to quietly disarm the alarm to allow my exit and then to re-set it back to stay mode. Just in case I need to re-enter. Thanking you in advance. Rudy.

Thanks so much for responding. Program works perfectly...I agree now that I see the lights flickering. It's drawing a bit of attention, would prefer the chirp, but would have to hear them from outside in the car. Thanks again.

Just added Elk module to ISY and wanted to create my first program. I have a remote added to Elk that allows me to arm and disarm the security system, as well as opening the garage overhead door. My program requirement is that when I arm Elk "away" mode through the remote, I need some type of notification that the house is actually armed. I am usually in the car at the end of the driveway pressing the remote. I would like ISY to work with Elk to flash the outside garage lights twice signalling that I have activated Elk arm away. Looking for some suggestions. Also please note this program will have to work with my existing program that turns on and off the outside garage lights after sunset until 11 p.m. So if the outside lights are on, I still need the lights to flash and then return back to the outside night program. Looking for some suggestions...thanking you in advance. Rudy

arw01...question. How did you post this...I can't find how to post new topics....thanks.