btreinders

You don't have an IFTTT account do you with a network resource pointing to it? I had something similar at one point and it was an IFTTT recipe that changed because I changed device names.

Did they charge you? On the web the filter itself looks like it is around $500-$600. After charging to install it, assume another $500, I think I could replace most of my Insteon gear for that kind of price. Only issue would be the keypadlincs, no one seems to make an equivalent.

@Panda88 had me reinstall it and that fixed the issue. Thank you!

I sent the logs to you. Thank you! I really appreciate it!

If it didn't take so long to bring it back up then I would not leave it open. But for now, I just leave it open until the PC it runs on reboots weekly. When it locks up are you seeing the icons go to gray? That is only time I see it lock up and it is most always because the Polisy was rebooted with it up or there was a networking issue.

Looks like the value in PG3x node is not updating either. I have temporarily just made a program that updates the system data every 15 minutes. That fixes it. Maybe @Panda88 has a better way. Thank you for the help!

I created a variable that is set to the plugin value any time the value is changed. That variable was not updating. Would leaving the AC open cause that?

Has anyone had Keypadlinc issues? I have one that sometimes turns on the first LED and sometimes all of them randomly. The other two Keypadlincs I have are not misbehaving so I am wondering if I have a bad one or if the Tesla Powerwall 3s are causing this? It's the furthest from the Powerwalls too.

This morning I see that it has not updated in over 12 hours.

I am not sure how long it is taking to update the battery percentage but my batteries can show 25% but really be at 100% and will update to that if I manually update system data in the Admin Console. Is there a way to make it update quicker? Short poll and long poll are 300 and 1800. Thank you.

These are the Zwave dimmers that are flickering for me. https://www.amazon.com/dp/B0C6P4NDSV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

The only update I would have is that I am not just seeing the flickering with Insteon, I am seeing it with zwave dimmers too. Seems like maybe only seeing it with dimmers? I am not seeing with zwave non-dimmers for sure. At least the zwave dimmers don't have the comm issues.

Opened a ticket and they said the SPANIO requires the new OS 14 so they were premature in advertising it.

@Geddy I did the switch profile based on your suggestion and it still does not work. I'll try again tomorrow and see if there is an issue right now.

When I select the Activate or the Purchase option they don't seem to work. And if I use the app I get an error stating it could not get the required parameters when I select the SPANIO option under the store and the app crashes.

I guess I had not put Insteon and flicker together but the ones I am seeing flicker on are Insteon. That is good info for sure. I will continue to monitor to see if all flickering is Insteon only or do I see it on zwave devices too. Definitely the only ones I have communication issues with is Insteon though. I have replaced some of the worst Insteon ones with zwave but unfortunately I used the Insteon only feature of knowing if someone physically tuned on or off the switch and that does not work with any of the zwave switches I have.

The batteries are definitely causing the issue. My installer says there will be a filter capable of handing the amps the batteries put out next year that would be for consumers. Right now there are commercial grade filters capable of it but they are overkill and too expensive. $2000. My installer also suggested I try Clip-on Ferrite Ring Core RFI EMI Noise Suppressors on the circuits having issues as a temporary fix. I purchased these and installed them today. https://www.amazon.com/dp/B08BPHCXR3?ref=ppx_yo2ov_dt_b_fed_asin_title I tried them on the problem circuits and even on the lines coming from the batteries themselves. It may have made things slightly better but definitely not acceptable. They make a pretty loud buzzing noise or humming noise too. Since I really only have 4 to 5 Insteon switches that are exhibiting issues out of probably 30 or more I am planning to switch those with some of my other Z-wave switches and see if I can get all issues taken care of. That's my new plan anyway, until there is an affordable solution. Sorry I don't have better news.

I want to make sure by keeping them off overnight but so far so good.

Not yet. I did just turn off the batteries this morning to make sure those are what is causing the issue. I also have an email out to the installer to see if they can get any information from Tesla. I only sent that yesterday. I will report back with any findings.

Ticket opened, thank you

Same here, I just had 2 powerwall 3s installed and the plugin would not work. I updated packages and PG3x still shows 3.2.27 and I don't see a version beyond that in the official current versions page. If it isn't officially released yet how do I manually update it? Choose install DEV packages? Thank you in advance.

I had two powerwall 3s installed this week and I am seeing issues as well. Almost all insteon devices will have a pop up over time saying communication lost. I did see one LED light in the house pulsing about once a second so maybe that isn't related and it's just about go out but it did start happening at about the same time. Before seeing this thread I thought maybe it was the SPAN power service panel that was installed with the batteries as well. I'll have to find out how to power them down and see if that solves the issues. Even then, I doubt we will find a quick solution other than replacing all Insteon devices.

So I bought some HS200 switches hardware version 5.26 and firmware 1.0.1 and I did not let it update and it isn't being discovered either. I tried putting in the IP as well. Appreciate any answers.

I am seeing the same with 2.0.4, just stays disconnected. The logs do not scroll anything either.

Any news here? I have a new HS220 3.26 hardware version and firmware 1.1.1 and it is not being discovered either. Is the Home Assistant integration from TP-Link itself? Or is it unofficial like this plugin? I ask because this new device does work in HA.