btreinders

These are the Zwave dimmers that are flickering for me. https://www.amazon.com/dp/B0C6P4NDSV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

The only update I would have is that I am not just seeing the flickering with Insteon, I am seeing it with zwave dimmers too. Seems like maybe only seeing it with dimmers? I am not seeing with zwave non-dimmers for sure. At least the zwave dimmers don't have the comm issues.

Opened a ticket and they said the SPANIO requires the new OS 14 so they were premature in advertising it.

@Geddy I did the switch profile based on your suggestion and it still does not work. I'll try again tomorrow and see if there is an issue right now.

When I select the Activate or the Purchase option they don't seem to work. And if I use the app I get an error stating it could not get the required parameters when I select the SPANIO option under the store and the app crashes.

I guess I had not put Insteon and flicker together but the ones I am seeing flicker on are Insteon. That is good info for sure. I will continue to monitor to see if all flickering is Insteon only or do I see it on zwave devices too. Definitely the only ones I have communication issues with is Insteon though. I have replaced some of the worst Insteon ones with zwave but unfortunately I used the Insteon only feature of knowing if someone physically tuned on or off the switch and that does not work with any of the zwave switches I have.

The batteries are definitely causing the issue. My installer says there will be a filter capable of handing the amps the batteries put out next year that would be for consumers. Right now there are commercial grade filters capable of it but they are overkill and too expensive. $2000. My installer also suggested I try Clip-on Ferrite Ring Core RFI EMI Noise Suppressors on the circuits having issues as a temporary fix. I purchased these and installed them today. https://www.amazon.com/dp/B08BPHCXR3?ref=ppx_yo2ov_dt_b_fed_asin_title I tried them on the problem circuits and even on the lines coming from the batteries themselves. It may have made things slightly better but definitely not acceptable. They make a pretty loud buzzing noise or humming noise too. Since I really only have 4 to 5 Insteon switches that are exhibiting issues out of probably 30 or more I am planning to switch those with some of my other Z-wave switches and see if I can get all issues taken care of. That's my new plan anyway, until there is an affordable solution. Sorry I don't have better news.

I want to make sure by keeping them off overnight but so far so good.

Not yet. I did just turn off the batteries this morning to make sure those are what is causing the issue. I also have an email out to the installer to see if they can get any information from Tesla. I only sent that yesterday. I will report back with any findings.

Ticket opened, thank you

Same here, I just had 2 powerwall 3s installed and the plugin would not work. I updated packages and PG3x still shows 3.2.27 and I don't see a version beyond that in the official current versions page. If it isn't officially released yet how do I manually update it? Choose install DEV packages? Thank you in advance.

I had two powerwall 3s installed this week and I am seeing issues as well. Almost all insteon devices will have a pop up over time saying communication lost. I did see one LED light in the house pulsing about once a second so maybe that isn't related and it's just about go out but it did start happening at about the same time. Before seeing this thread I thought maybe it was the SPAN power service panel that was installed with the batteries as well. I'll have to find out how to power them down and see if that solves the issues. Even then, I doubt we will find a quick solution other than replacing all Insteon devices.

So I bought some HS200 switches hardware version 5.26 and firmware 1.0.1 and I did not let it update and it isn't being discovered either. I tried putting in the IP as well. Appreciate any answers.

I am seeing the same with 2.0.4, just stays disconnected. The logs do not scroll anything either.

Any news here? I have a new HS220 3.26 hardware version and firmware 1.1.1 and it is not being discovered either. Is the Home Assistant integration from TP-Link itself? Or is it unofficial like this plugin? I ask because this new device does work in HA.

I can confirm that a backup that used to take 45 minutes now takes seconds. I do get the pop up for a split second but by that time the back up is complete. This is great! My backup size before upgrade was 845 KB, new ones are now 829KB. Seems reasonable to me.

Upgrade took a long time and I was on the latest and once complete I rebooted. After an hour or so and not getting the notification I set up to let me know my programs are running I logged into the AC. I would then try to login to PG3x and the AC would immediately pop up a busy window and PG3x would give an error and not let me login. Meanwhile I was getting notifications that plugins were starting but much much slower than a normal reboot. Once I got the last one I was finally able to login to PG3x and 3 plugins were not running and hitting start would result in a message saying it was already running. So I rebooted again and that reboot went like normal, quick start up and notification that my programs were running came in the timeframe it should. I went back to PG3x and Holiday, Wake-On-Lan and Ping were still not showing as running. Stopping, starting, restarting, nothing worked so I just reinstalled them individually and now all is good.

Glad it is working again. That is strange for sure.

Does it look similar to this?

Try the configuration button. There is an explanation on what and how to set.

Thank you!

The new subscription price is higher for Polisy than EISY? I can see that for the old ISY-994 but for Polisy? Am I reading the announcement correctly? Thank you.

Thank you!

When I click on the FREE button It take me to create an account if I am not logged in and says I am already logged in if I am logged in. Nothing about the free API. If I go to and then select the Subscribe under the 1000 API calls per day for free it takes me to this and as you can see it says $0.15 per 100 calls. Are you saying that is only after the 1st 1000? Thank you!

Not working for me either now once I updated. Are we saying we need a professional plan that costs money? I can't see any that don't eventually say you have to pay $0.15 per 100 calls. Says free at first and then requires a payment method.