SJK

I have my polyglot running on Polisy.. Version 2.2.13 Status: ConnectedFrontend Version: 2.2.9-5ISY Version: 5.1.1Uptime: 20 Hour(s) 45 Minute(s) 53 Second(s) (c) 2021 UDIRunning on Polisy I installed a few new nodeservers to play with and also tried to delve into config of ones I had previously installed but not configured. I can add parameters, hit save configuration, then restart the relevant nodeserver. I'd go to the log page, and nothing new would appear (not even shutdown/restart log messages). Clicking back to configuration, everything I just entered is there. If I go to the dashboard, then click on details to refresh the nodeserver page, the log would have refreshed (showing the data I wasn't seeing before doing that) and update, but when I reload the configuration tab, all my parameters are gone. At first I thought it was a problem with a particular nodeserver, but I can reproduce it with any nodeserver. Now nodeservers I didn't touch still have their config info. I think the config tab isn't saving writing the values. I have no idea where to go looking for them via SSH either. I did try a polisy update earlier just to see if there's anything new. I restarted polyglot. I shutdown polisy and power cycled it too. No effect. BTW: The uptime above is not correct- should only be a few minutes. By the time I got done writing this post- it's now saying uptime is 27 minutes (which is correct).

Thanks! Just to add a bit more information: here's a screenshot. This AM I find it still thinks it's in CA, but is reporting the correct EST time. And sunrise/sunset makes no sense at all. It's 9:11AM EST at the time of the screenshot and bright and beautifully sunny.

Update: time just flipped to Pacific (LA) while hitting submit on the last reply. I'll also note I'm running the TimeData node server. From it's logs, the time/date information on polisy is correct, including DST status and my manually-input lat/long: 2021-11-07 16:35:13,534 Controller polyinterface INFO polyinterface:reportDriver: Updating Driver timedata - GV1: 35, uom: 0 2021-11-07 16:35:13,537 Controller polyinterface INFO polyinterface:reportDriver: Updating Driver timedata - GV9: 447395, uom: 0 2021-11-07 16:35:13,539 Controller polyinterface DEBUG timedata:season: dd: 7 md: 1107 2021-11-07 16:35:13,540 Controller polyinterface DEBUG timedata:getNodeUpdates: UTC offset: -5.0 2021-11-07 16:35:13,543 Controller polyinterface DEBUG timedata:getNodeUpdates: Old epoch days: 18938.89945601852 2021-11-07 16:35:13,544 Controller polyinterface DEBUG timedata:getNodeUpdates: Stripped date string is 2021-11-7 16:35, weekday 6, days since epoch: 18938.89945601852, hours this year: 7456 2021-11-07 16:35:13,544 Controller polyinterface DEBUG timedata:getNodeUpdates: Day of week 6, Week number 46, Day of Year 311 2021-11-07 16:35:13,545 Controller polyinterface DEBUG timedata:getNodeUpdates: Minutes in year to now 447395, hemisphere north, season 2, leap year 0, isDST 0

I was having the same issue. I'm on ISY v5.1.1 Tried a polisy update via the UI. Last reboot it changed to match the Polyglot settings, then reverted back after a few minutes to pacific time. Tried comandline update options without effect. Manually called to update udx and polisy as above, and it worked despite the output not saying anything was updated. But again, simply restarting the system worked for a while- so I'll keep an eye on it. However, while the current date/time are correct, the sunrise/sunset are off by an our (stating today that sunset is at 15:51:53) when it should be 16:52 according to reality. Today was the switch to standard time. Wonder if it will fix itself tomorrow- Not sure when those values are updated. While there's a checkbox for Daylight Savings in the ISY UI, it's greyed out- and currently checked (incorrectly). Date and time is hard.

Thanks. This must be leftover from my first Elk - Insteon integration circa 2007. Thought I left that in the building. Date code is more recent though. ?‍♀️ Leaves me to wonder what will happen in the other two locations I have installed ISY and Insteon using the now discontinued? serial PLMs. (Smart home has it sold out, orchestrated home has marked it discontinued.) When they die, my ISY994s are now useless? Guess I’ll have to buy a few more Polisy units unless Michael lets us install the ISY software on a Pi (which makes poor business sense I’d imagine unless he decided to sell it like the ISY modules).

Anyone know a minimum revision level for the USB PLM to work with ISY on Polisy? I have a 2414U V2.1 lying around I thought I'd try. I'm not getting a connection despite the PLM appearing to be powered up. All my other PLMs are serial so I cannot do a hardware test by swapping it out. However I'm not seeing any UART entries in the domes log- just vendor/product codes corresponding to polisy devices. Most likely I need to get a new 2413U USB PLM? I have a few spare 2413S ones but that's not going to help me without a DP9-RJ45 cable. (Also I think one of them has bad caps and the the other is needed for an ISY going to another property)