k5map

I recently purchased a 6-button Keypad and am having some issues with getting its A-D buttons to turn on with scenes. Here is my program which is not causing the Keypad A light to turn on. If From Sunset + 10 minutes To 12:25:00AM (next day) Then Set Scene 'Front Door Light' On Wait 2 seconds Set 'X10 Devices / Front Door Light' On Set Scene 'Mstr Bedroom Keypad ( B)' On Else Set 'X10 Devices / Front Door Light' Off Wait 2 seconds Set Scene 'Front Door Light' Off Set Scene 'Mstr Bedroom Keypad ( B)' Off Keypad B is a controller in Scene 'Front Door Light' as well as a responder to scene 'Mstr Bedroom Keypad ( B)', When this program runs, all of the lights come on and the ISY shows the B button as on but the LED on the button is still off. If I press the button, it correctly turns on/off the scenes and the LED does work. But the LED does not respond to the program above. Anyone have an idea why?

KPL A turns ON/OFF the garage light (no associated with local load). It seems that the KPL-A LED comes on/off most of the time. If I press the KPL-A multiple times, it gets back in sync with the garage light (controlled by SL). Should the LED correctly reflect the light on/off whether I turn it off via the SL, ISY Program or turning the scene on/off from the ISY web console?

Lee, Ok many thanks... I changed my setup as you instructed and everything is working except one situation. KPL-A follows the state of the remote light connected to the SL. I have one other situation I am unable to resolve. The KPL is the switch for a local lamp. When the local lamp is ON and I turn on the remote light mentioned previously (KPL-A). The LED on A does not turn on. Any idea why?

Lee, Thanks... I was mistaken in the device controlling the light is a ToggeLinc. Do I still need to add it as a Controller so when I switch the light with the ToggleLinc it will change the light on the KPL button?

I successfully added a 6-Button KPL to my ISY as well as to a scene as a controller (the scene has a SwitchLinc as the responder); the KPL does not switch the load. My problem is the button/light on the KPL (button A) correctly indicates when the light is on/off. My problem is if I turn the light on/off locally via the SwitchLinc, the button the KPL does not change. What must I change to get the KPL button to follow the on/off of the light?

(wiping the egg from my face)... thanks Lee... need my eyes checked as I completely overlooked that option.

I accidently moved one of my Scenes into a folder I created to organize my devices. I can't find a way to move the Scene back to the "root" level with my other Scenes. Short of creating a new Scene, does anyone know of a way to move a Scene up one level?

I have a RemoteLinc2 setup where each of the 4 buttons individually joined to 4 different scenes. When my ISY program changes a scene on/off, the corresponding RemoteLinc2 button does not follow the scene. For example, if the button is shown as ON and the program turns the scene OFF. All of the responders are turned off but the button still shows a status of ON. Is this to be expected or do I have a setup problem?

I've written a program to send me a email if the INSTEON Wireless Motion Sensor (2842-222) switches ON. Will this program work as written? If $Vacation is 1 And Control 'Back Door-Sensor' is switched On Then Send Notification to 'Default' content 'Back Door Motion' Else - No Actions - (To add one, press 'Action')