bsobel

I just updated to 3.1.16 and the 2487S is still being detected as an 'unknown device' yet the forums say this was added earlier in the 3.1.x line. I cleared my java cache and the install went fine, any ideas why the device is unknown again?

Yep, tried that too. Factory reset, delete from ISY and readded it. After readding the behaviour came back....

Wed 01/26/2011 05:56:33 PM : [iNST-SRX ] 02 50 08.50.E9 00.00.01 C7 11 00 LTONRR (00) Wed 01/26/2011 05:56:33 PM : [standard-Group][08.50.E9-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:56:33 PM : [ 8 50 E9 1] DON 0 Wed 01/26/2011 05:56:33 PM : [ 8 50 E9 1] ST 255 Wed 01/26/2011 05:56:33 PM : [iNST-SRX ] 02 50 08.50.E9 13.22.DC 41 11 01 LTONRR (01) Wed 01/26/2011 05:56:33 PM : [standard-Cleanup][08.50.E9-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:57:20 PM : [iNST-SRX ] 02 50 08.50.E9 00.00.01 C7 13 00 LTOFFRR(00) Wed 01/26/2011 05:57:20 PM : [standard-Group][08.50.E9-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:57:20 PM : [ 8 50 E9 1] DOF 0 Wed 01/26/2011 05:57:20 PM : [ 8 50 E9 1] ST 0 Wed 01/26/2011 05:57:20 PM : [iNST-SRX ] 02 50 08.50.E9 13.22.DC 41 13 01 LTOFFRR(01) Wed 01/26/2011 05:57:20 PM : [standard-Cleanup][08.50.E9-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:57:20 PM : [iNST-SRX ] 02 50 08.50.E9 13.22.DC 42 13 01 LTOFFRR(01) Wed 01/26/2011 05:57:20 PM : [standard-Cleanup][08.50.E9-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Wed 01/26/2011 05:57:20 PM : Duplicate: ignored Wed 01/26/2011 05:57:20 PM : [iNST-SRX ] 02 50 08.50.E9 13.22.DC 42 13 01 LTOFFRR(01): Process Message: failed Wed 01/26/2011 05:57:20 PM : [standard-Cleanup][08.50.E9-->ISY/PLM Group=1] Max Hops=2, Hops Left=0

Ok, I'm stumped and need some suggestions. I have a switchlinc in my master bedroom that is acting as a controller to a collection of other lights this was originally the desired behaviour. I added a (seperate) keypadlink so I decided to repurpose this switch to just control two table lamps. The problem is, I can not seem to get it to 'forget' the scene. The scene has been deleted in ISY (its a 99i). If I factory reset the switch it does not control any of the other devices, but as soon as I restore the device in ISY (which shows it not currently lnked to anything) it starts controlling the lights again. I factory reset one of the switchlinc's it is controlling. It also stopped acting like a member of this scene, but as soon as I restore the device in ISY (so it's in it's normal scene's) it starts responding to the above switch again. I'm stumped, ISY shows no obvious links and factory reset it clearly doing something until ISY reprogramms the switch. What have I forgotten or missed? Thanks, Bill

Im also seeing gmail sending not working (test emails fail). The credentials are correct, account enabled properly (use these accounts for lots of other reporting tools as well). Just confirming the other poster that there seems to be an issue.