themlruts

Can you post links to where the confiigurator and bridge are? Thanks Mike

Just wondering if anyone has guide to get this running on the pi. I will just have my router give my pi a static. But where does the jar file have to be placed? Anything else i need to worry about? Thanks Mike

Just a thought I wonder if you should setup a polling site for the words. Give you some metrics of what people want. Just a thought

Thanks

I am thinking about using a pi. Are you guys using a the version pi or the new one? Will it run on both? Thanks Mike

Jimbo Its a state. The weird part is that it had been work fine. The only thing I did was to create an all living room lights scene to shut off all lights in the room

I have a 6 button KBL I have button B controlling a variable for fan speed. If Control 'Inside / Living_Room / Devices / Living Room KPL / LR_Keypad- B' is switched On Then $Living_FanSpeed += 1 Else - No Actions - (To add one, press 'Action') Program fan speed high If $Living_FanSpeed is 1 Then Set 'Inside / Living_Room / Devices / LR_Fan-Motor' High Else - No Actions - (To add one, press 'Action') To control the kpl button light I have this program read the following If $Living_FanSpeed >= 1 Then Set Scene 'Inside / Living_Room / Scenes / LR_Fan_KBL_Light' On Else Set Scene 'Inside / Living_Room / Scenes / LR_Fan_KBL_Light' Off I know the light on the switch works because when i press it, it lights then shuts off. Also looking in the console it shows it on. Let me know your thoughts Thanks Mike

I want to measure humidity in a couple places in the house. First the two bathrooms then the basement. For bathrooms if it reaches thresh hold the kick fans on My only. Question is I don't want to spend money n putting thermostats in every room. Is there. Some kind of wired sensor I can put in that would connect back to a centeral box that would allow for multiple sensors? Thanks Mike

Jay I finally got the emulator running. Just need to work on my web server. Thanks Mike

I am ttring to get this up and running but i have stuff listening on the the ports and i get access denied when I try to kill the pids I fixed the pids but now i get connection refused Thoughts

Set mine up last night pretty happy with it. Still need to setup the hue emulator. I'm impressed with the sound quality based on its size. I live in a a small 1200sqft ranch and I out the echo in the leaving room and can give it commands from the bedroom. The remote is handy as well. It's play with you like Siri.

Mine should be here tomorrow. I have to get the hue fired up

I just put in a EZflora. I have no current rain sensor. I was looking to get a module so I can use the data and have it schedule my waterings. Do I need both? What are the differences? Thank Mike

+1

I believe that the single turns on even though the double tap is what I did on the keypad.

ok now more complication. I have all my beeps working but.. When I go to bed at not I dont want to hear the beeps. So I was thining about a double tap to arm at night. Not sure on how to do that? I tried to make a seccond program for the double tap. Here are the two programs Single Tap If Control 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is not switched Fast On And Status 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is not Off Then Repeat 10 times Wait 2 seconds Set Scene 'Inside / Alarms_Alerts / Scenes / Door_Alert' Beep Repeat 10 times Set Scene 'Inside / Alarms_Alerts / Scenes / Door_Alert' Beep Repeat 1 times $Perimeter_Armed = 1 Else $Perimeter_Armed = 0 Double Tap If Control 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is switched Fast On Then $Perimeter_Armed = 1 Else $Perimeter_Armed = 0 It doesn't seem to work. Thanks Mike

Here is how I did the arm. If Status 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is not Off Then Repeat 30 times Set Scene 'Inside / Alarms_Alerts / Scenes / Door_Alert' Beep Repeat 1 times $Perimeter_Armed = 1 Else $Perimeter_Armed = 0 When I come home and its armed If Status 'Inside / Hallway / Devices / HW_Basement-Door-Open' is On Or Status 'Inside / Kitchen / Devices / KT_Entry-Door-Opened' is On Or Status 'Inside / Living_Room / Devices / LR_Front_Door-Opened' is On Or Status 'Inside / Kitchen / Devices / KT_Slider-Opened' is On Or Status 'Garage / Devices / GR_Entry_Back-Door-Closed-Ope' is On Then Repeat 30 times Set Scene 'Inside / Alarms_Alerts / Scenes / Door_Alert' Beep Repeat 1 times Send Notification to 'Alarm' content 'Perimeter_Alarm' Else - No Actions - (To add one, press 'Action')

Thanks guys I am changed it around using a varible now becuase of my delay I want. But to make it even more complicated During the 30 sec delay I want to beep a scene letting the user now that its arming. I am also doing away with the auto arming. Who is my arm/disarm program. If Status 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is not Off Then Wait 30 seconds $Perimier_Armed = 1 Else $Perimier_Armed = 0 I could just use another variable and program for beep. Thoughts Loop option would be great to bad the isy doesnt have it.

oberkcNot to make things more complicated. But How can I add a 20 sec delay if I manully arm? Example I button on kepad link then delay for 20 secs. Allows me to leave before arm. I would also need it the other way as well. When I come home 20sec so I can shut keypad off THougths?

Thank you I will give it a try. I have never used folder condtions before. I will test it out Thanks Mike

Here is what I want to do. I think its pretty simple but I am new to ISY. Hardware ISY994 pro All Doors have open/closed sensors Keypad link to arm/disarm "arm" Means that if any of the doors are opened it will send me an alert. 1 . auto arm the house at a specific time lets say from 11pm-7am (bedtime) Then from 8am-4pm(work hours) 2. Would also like to manually arm/disarm using keypad link. a. Also may need to disarm/arm between the auto arm hours because I am a Vol firemen and go to calls at all times. 3. During the arm hours i want to the keypad link to show its armed (keypad link button d lit) Let me who you I have so far. Program: Arm_House If Control 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is switched On Or From 4:42:00PM To 4:45:00PM (same day) Then $Perimier_Armed = 1 Else $Perimier_Armed = 0 Program:Disarm_Hosue If Control 'Inside / Living_Room / Devices / LR_Keypad / LR_Keypad- D' is switched Off Then $Perimier_Armed = 0 Else - No Actions - (To add one, press 'Action') Program:Door_Sensors_Armed If $Perimier_Armed is 1 And ( Status 'Inside / Hallway / Devices / HW_Basement-Door-Open' is On Or Status 'Inside / Kitchen / Devices / KT_Entry-Door-Opened' is On Or Status 'Inside / Living_Room / Devices / LR_Front_Door-Opened' is On Or Status 'Inside / Kitchen / Devices / KT_Slider-Opened' is On Or Status 'Garage / Devices / GR_Entry_Back-Door-Closed-Ope' is On ) Then $Doors_Open_closed = 0 Send Notification to 'Alarm' content 'Perimeter_Alarm' Else $Doors_Open_closed = 1 You see the Varible $Doors_Open_closed. This controls a scene so when the door is open it beeps twice and when it closes it beeps once. The wife likes the beep even when not armed. How would you do it? Thanks Mike

Just got my invite should be here in june. As with everyone would love it to work with ISY.

I am wondering if they will keep the 99 price for prime users. I would love to link this with my ISY.

Thanks so much.

So I want to use geofencing to turn off the lights when we leave. The problem i'm trying to solve is this. If the wife and I both leave then lights should go off. If I just leave and she is home lights stay on. If she leaves and i'm already gone then lights should shut off. I'm just not rue how to handle the code on this Thanks Mike