BobMic

So let's see if I understand...by putting KPL-B in scene 1 as a responder you are setting the LED for button B to off when scene 1 is pressed? That may explain why my LEDs have never done what I wanted them to do. Is the LED on a button just a responder and the button just a controller and act independently? Thanks, Bob

I think this is what you are trying to do: Scene 1 (push button KPL-A) Controller/Responder – KPL- A it’s load at 20% Responder - light 1 at 20% Responder – light 2 at 20% Etc Scene 2 (push button KPL-B Controller KPL-B Responder – KPL-A load at %50 Responder – light 1 at 100% Responder – light 2 at 80% Etc As I understand it you should be able to do this with no problem. I have similar scenes in my set up where button ##.##.##-B controls the attached load at a different on % than the main button. I am using mine as a 6 button so the connected load is controlled by the top and bottom buttons like a simple dimmer and the other 4 buttons are scenes that include the connected load and several other devices but I can't imagine it is any different in 8 button mode.