oper8

What is the right way to be able to change a configuration parameter for a z-wave device from the admin console ? In this particular case, I'm referring to a ZOOZ S2 multi switch. I can change the configuration parameter running a program but I cannot change it from the admin console. I tried "Write changes" after I entered the parameter but it seems that the command is not sent to the device. Works perfectly fine if I run "Then" in the program (see screenshots attached).

There are few useful programs you can do to use the full capabilities of BE469. I attached a couple of screens. The first is changing the status of the lock from auto-lock to manual. This is useful if you forget the door unlocked at night. In my case, after 10:00 PM, the door locks itself automatically. The second one is sending me notifications when the door is locked or open.

Hi Michel, Problem is now resolved by your support who removed the nodes from Polyglot and that allowed me to recreate the Climacell node server. Thanks very much ! But I still have trouble installing the LinkTap node server from the Polyglot Store. I entered my API Key in the Custom Configuration parameters but nothing is happening. The node shows disconnected and not running and I don't see any of the other configuration parameters in the details. Please note I'm not an experienced Python developer..... Where can I find more help to configure the LinkTap Node server ? Thanks !

I lost my connection to Polyglot cloud. Was working fine then something went wrong, like the cloud was no longer available. I removed all node connections from my Portal and now when I want to configure connection again a get Erro HTTP 401. I changed my Portal password but I don't know what else. This Polyglot cloud is a very confusing environment. Help. please. My ISY ID: is 00:21:b9:02:43:1f Thanks

After some more research I found the way. It's very simple. Auto-lock is the configuration parameter # 15. Enter the value of 0 for disable or 255 for enable. Works like a charm.

That is exactly what I want to do but I could not find the way to pass the configuration codes from a program in ISY. My question was: is this possible, and if it is, how ?

I just installed my first Schlage Connect BE469 and it's working perfectly fine with my ISY994 Z-Wave running on release 5.0.15A . I'm trying to write a program to change the status of auto-lock from on to off based on a defined schedule. Can this be done in a program to send configuration codes to BE469 ? These codes can be found here: https://www.schlage.com/content/dam/sch-us/documents/pdf/installation-manuals/24352403.pdf

Is it possible to send configuration parameters in a program to BE469 to change the state of Auto re-lock from on to off on a defined schedule ? I'm running 5.0.15A and everything works fine. I would like to build a program to disable auto lock during the day (code 0x00) and enable during the night (code 0xFF). I tried the Action in a program using "set configuration" but I'm not sure this is the right way to do it.