I was having an issue (did not work) with a scene that was controlled by RemoteLinc. I removed the RemoteLinc button from the scene. Next I reset RemoteLinc to factory defaults and then restored it (ISY Restore Device). Before I put it back in scene I wanted to confirm -- is following normal for On button press of an unlinked button on RemoteLinc?

 

Sat 03/09/2013 08:37:23 PM : [iNST-SRX ] 02 50 11.98.59 00.00.05 C7 11 00 LTONRR (00)

Sat 03/09/2013 08:37:23 PM : [std-Group ] 11.98.59-->Group=5, Max Hops=3, Hops Left=1

Sat 03/09/2013 08:37:23 PM : [ 11 98 59 5] DON 0

Sat 03/09/2013 08:37:23 PM : [ 11 98 59 5] ST 255

Sat 03/09/2013 08:37:23 PM : [iNST-SRX ] 02 50 11.98.59 00.00.05 C7 11 00 LTONRR (00)

Sat 03/09/2013 08:37:23 PM : [std-Group ] 11.98.59-->Group=5, Max Hops=3, Hops Left=1

Sat 03/09/2013 08:37:23 PM : [iNST-DUP ] Previous message ignored.

Sat 03/09/2013 08:37:23 PM : [iNST-SRX ] 02 50 11.98.59 0E.D9.01 41 11 05 LTONRR (05)

Sat 03/09/2013 08:37:23 PM : [std-Cleanup ] 11.98.59-->ISY/PLM Group=5, Max Hops=1, Hops Left=0

Sat 03/09/2013 08:37:23 PM : [iNST-DUP ] Previous message ignored.

The trace is correct for button 5 On.

Thanks.