ferdies Posted April 17, 2013 Posted April 17, 2013 I have a controlinc (2430) v.00. When I upgraded to FW 4.0.3, there's no option now to select "ON" for the status. Please see attached. Is this a bug or by design? Thanks.
ferdies Posted April 17, 2013 Author Posted April 17, 2013 Also it is the same case for 2876DB Icon Dimmer v.39.
LeeG Posted April 17, 2013 Posted April 17, 2013 Select 100% which is what On actually represents. Some folks have been confused that On meant any value other than Off when On actually means 100% On.
ferdies Posted April 17, 2013 Author Posted April 17, 2013 Yes, I understand that 100% means ON. However, in the older FW, one can select ON, OFF, xx%. So this is now by design, correct.
LeeG Posted April 17, 2013 Posted April 17, 2013 It is a design change. Before there was Off, 1%-99%, On to represent the various states. Now it is Off, 1%-100%
Recommended Posts