Grayson Posted August 3, 2013 Posted August 3, 2013 Hi, I am fairly new with the Insteon set of products. I recently setup the ISY994i and a couple of dimmer switches and a motion sensor. I have now moved on the the I/O Linc Garage Door control. What I want to do seems simple, but I can't figure out how to program and/or create a scene to do it.... I currently have a simple program as follows If Control 'Button C-GarageDoor' is switched ON Then Set 'Garage Door Swc' On So if I press the C button on the 8 pad switch the garage door opens or closes. What I want to do is have the LED for Button 'C' always reflect the status of the garage door regardless if I physically press the C button or if I use the hardwire button in the garage or the garage door remote in a car. So somehow I want to have a program and/or scene that indicates if the 'Garage Door Sensor' is OFF then turn on the LED for Button C so the button is lite anytime the garage door is open. I can't seem to figure out how to do this. Please Help.... Thanks! John
LeeG Posted August 3, 2013 Posted August 3, 2013 Define an ISY Scene ‘keypadlinc button C’ (arbitrary Scene name) with KeypadLinc button C as Responder. If Control ‘iolinc – Sensor’ is switched On Or Control ‘iolinc – Sensor' is not switched Off Then Set Scene ‘keypadlinc button C’ Off Else Set Scene ‘keypadlinc button C’ On The above ISY Program turns KeypadLinc button C LED Off when the I/O Linc Sensor turns On and turns KeypadLinc button C LED On when the I/O Linc Sensor turns Off
Recommended Posts