arw01 Posted November 17, 2013 Posted November 17, 2013 A few months back had to drop the main breaker and either the plm lost some links or a lot of light switches got corrupted. Therefore I did a restore on a number of switches to get their links back to controlling their various lights. Fast forward and all of my basement lights on Switchlinc dimmer V.27 switches had reset to instant on and full power. I've finally gotten around to attempting to reset those parameters, and I thought you just slide the little slider on the switch screen itself (not in a scene) so they were different than what the ISY thinks they are, and it writes them out. Walk to the switch and no difference. Set it again, see the write to the switch and still no difference. What am I missing here? Sun 11/17/2013 07:39:41 AM : [ 6 F1 DD 1] ST 214 Sun 11/17/2013 07:39:42 AM : [ 6 F1 DD 1] OL 214 Sun 11/17/2013 07:39:42 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:39:42 AM : [6 F1 DD 1 ] Memory : Write dbAddr=0x0032 [D6] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:39:48 AM : [ 6 F1 DD 1] ST 0 Sun 11/17/2013 07:39:58 AM : [ 23 3C D4 1] DON 1 Sun 11/17/2013 07:39:58 AM : [ 23 3C D4 1] ST 255 Sun 11/17/2013 07:40:01 AM : [ 6 D7 0 1] ST 147 Sun 11/17/2013 07:40:01 AM : [ 6 D7 0 1] OL 147 Sun 11/17/2013 07:40:01 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:40:01 AM : [6 D7 0 1 ] Memory : Write dbAddr=0x0032 [93] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:40:07 AM : [ 6 D7 0 1] ST 0 Sun 11/17/2013 07:40:27 AM : [ 6 F1 DD 1] DON 0 Sun 11/17/2013 07:40:27 AM : [ 6 F1 DD 1] ST 214 Sun 11/17/2013 07:41:33 AM : [ 6 D7 0 1] RR 25 Sun 11/17/2013 07:41:33 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:41:33 AM : [6 D7 0 1 ] Memory : Write dbAddr=0x0021 [19] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:41:41 AM : [ 6 F1 DD 1] RR 26 Sun 11/17/2013 07:41:41 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:41:41 AM : [6 F1 DD 1 ] Memory : Write dbAddr=0x0021 [1A] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:41:45 AM : [ 6 F1 DD 1] ST 0 Sun 11/17/2013 07:41:51 AM : [ 6 F1 DD 1] DON 0 Sun 11/17/2013 07:41:51 AM : [ 6 F1 DD 1] ST 214 Sun 11/17/2013 07:41:56 AM : [ 6 D7 0 1] DON 0 Sun 11/17/2013 07:41:56 AM : [ 6 D7 0 1] ST 147 Sun 11/17/2013 07:41:58 AM : [ 6 F1 DD 1] DOF 0 Sun 11/17/2013 07:41:58 AM : [ 6 F1 DD 1] ST 0 Sun 11/17/2013 07:41:59 AM : [ 6 D7 0 1] DOF 0 Sun 11/17/2013 07:41:59 AM : [ 13 60 2E 1] ST 0 Sun 11/17/2013 07:41:59 AM : [ 6 D7 0 1] ST 0 Sun 11/17/2013 07:42:02 AM : [ 6 D7 0 1] DON 0 Sun 11/17/2013 07:42:02 AM : [ 13 60 2E 1] ST 255 Sun 11/17/2013 07:42:02 AM : [ 6 D7 0 1] ST 147 Sun 11/17/2013 07:42:19 AM : [ 6 F1 DD 1] RR 27 Sun 11/17/2013 07:42:19 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:42:19 AM : [6 F1 DD 1 ] Memory : Write dbAddr=0x0021 [1B] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:42:34 AM : [ 6 F1 DD 1] DON 0 Sun 11/17/2013 07:42:34 AM : [ 6 F1 DD 1] ST 214 Sun 11/17/2013 07:42:38 AM : [ 6 F1 DD 1] DOF 0 Sun 11/17/2013 07:42:38 AM : [ 6 F1 DD 1] ST 0 Sun 11/17/2013 07:43:03 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:43:03 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 0D 00 Sun 11/17/2013 07:43:03 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 0D 00 06 (00) Sun 11/17/2013 07:43:03 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 0D 00 (00) Sun 11/17/2013 07:43:03 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:03 AM : [6 F1 DD 0 ] Calibrating engine version Sun 11/17/2013 07:43:27 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 11 CC Sun 11/17/2013 07:43:27 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 11 CC 06 LTONRR (CC) Sun 11/17/2013 07:43:27 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 11 CC LTONRR (CC) Sun 11/17/2013 07:43:27 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:27 AM : [ 6 F1 DD 1] ST 204 Sun 11/17/2013 07:43:28 AM : [ 6 F1 DD 1] OL 204 Sun 11/17/2013 07:43:28 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:43:28 AM : [6 F1 DD 1 ] Memory : Write dbAddr=0x0032 [CC] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:43:28 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 28 00 Sun 11/17/2013 07:43:28 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 28 00 06 SET-MSB(00) Sun 11/17/2013 07:43:28 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 28 00 SET-MSB(00) Sun 11/17/2013 07:43:28 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:28 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 2B 32 Sun 11/17/2013 07:43:28 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 2B 32 06 PEEK (32) Sun 11/17/2013 07:43:29 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 2B D6 PEEK (D6) Sun 11/17/2013 07:43:29 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:29 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 29 CC Sun 11/17/2013 07:43:29 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 29 CC 06 POKE (CC) Sun 11/17/2013 07:43:29 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 29 CC POKE (CC) Sun 11/17/2013 07:43:29 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:34 AM : [ 6 F1 DD 1] RR 25 Sun 11/17/2013 07:43:34 AM : [All ] Writing 1 bytes to devices Sun 11/17/2013 07:43:34 AM : [6 F1 DD 1 ] Memory : Write dbAddr=0x0021 [19] cmd1=0x2E cmd2=0x00 Sun 11/17/2013 07:43:34 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 28 00 Sun 11/17/2013 07:43:34 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 28 00 06 SET-MSB(00) Sun 11/17/2013 07:43:34 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 28 00 SET-MSB(00) Sun 11/17/2013 07:43:34 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:34 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 2B 21 Sun 11/17/2013 07:43:34 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 2B 21 06 PEEK (21) Sun 11/17/2013 07:43:35 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 2B 1B PEEK (1B) Sun 11/17/2013 07:43:35 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:35 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 29 19 Sun 11/17/2013 07:43:35 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 29 19 06 POKE (19) Sun 11/17/2013 07:43:35 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 29 19 POKE (19) Sun 11/17/2013 07:43:35 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:43 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 13 00 Sun 11/17/2013 07:43:43 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 13 00 06 LTOFFRR(00) Sun 11/17/2013 07:43:43 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 13 00 LTOFFRR(00) Sun 11/17/2013 07:43:43 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:43 AM : [ 6 F1 DD 1] ST 0 Sun 11/17/2013 07:43:59 AM : [iNST-SRX ] 02 50 06.F1.DD 00.00.01 CB 11 00 LTONRR (00) Sun 11/17/2013 07:43:59 AM : [std-Group ] 06.F1.DD-->Group=1, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:43:59 AM : [ 6 F1 DD 1] DON 0 Sun 11/17/2013 07:43:59 AM : [ 6 F1 DD 1] ST 204 Sun 11/17/2013 07:43:59 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 41 11 01 LTONRR (01) Sun 11/17/2013 07:43:59 AM : [std-Cleanup ] 06.F1.DD-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Sun 11/17/2013 07:43:59 AM : [iNST-DUP ] Previous message ignored. Sun 11/17/2013 07:44:23 AM : [iNST-TX-I1 ] 02 62 06 F1 DD 0F 13 00 Sun 11/17/2013 07:44:23 AM : [iNST-ACK ] 02 62 06.F1.DD 0F 13 00 06 LTOFFRR(00) Sun 11/17/2013 07:44:24 AM : [iNST-SRX ] 02 50 06.F1.DD 19.72.DE 2B 13 00 LTOFFRR(00) Sun 11/17/2013 07:44:24 AM : [std-Direct Ack] 06.F1.DD-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 11/17/2013 07:44:24 AM : [ 6 F1 DD 1] ST 0
oberkc Posted November 17, 2013 Posted November 17, 2013 My memory conntinues to be a little vague on this, but I recall some of the arlier devices may reuire a power cycle befor accepting the new settings. It is, at least, worth trying.
Brian H Posted November 17, 2013 Posted November 17, 2013 I believe v.27 was the first firmware version I have seen. I would also say you are going to have to cycle the power for the settings to stick. Either the breaker or the Air Gap Switch. Just don't push the Air Gap Switch past its normal resting place or you will factory reset it.
Recommended Posts