rizast Posted December 29, 2013 Posted December 29, 2013 Has any figured out how to control the Roku from the ISY? I found the following link that describes the curl command http://sdkdocs.roku.com/display/sdkdoc/ ... trol+Guide can this be configured in the network resources? if so any help would be great.
rizast Posted December 29, 2013 Author Posted December 29, 2013 I got it working! Step one: put your roku in developer mode press the home button and press the following buttons [Home] [Home] [Home] [up] [up] give it a password and reboot http://blog.roku.com/developer/ Step 2: create a network resource http -> post -> ip address of roku ->port 8060 =>path /keypress/home Timeout(ms) 500 and C Escaped Here are the commands you can use: Home Rev Fwd Play Select Left Right Down Up Back InstantReplay Info Backspace Search Enter Lit_* http://sdkdocs.roku.com/display/sdkdoc/ ... trol+Guide I have a Roku 3 so this process should work on older ones too Note: that the Roku will not let you give it a static ip address but you can reserve it on your dhcp server or router
ccclapp Posted May 8, 2014 Posted May 8, 2014 Hi, This is great you figured it out. How do you find it to be? Is a great or so so? Also, do you know if there's any way to go directly to a given channel?
rizast Posted May 8, 2014 Author Posted May 8, 2014 It works very well. If fact I never use the roku remote since my roku is accessible from all tv's in the house. As far as channels I suppose you can create a program to do it. (Ex. Down twice, right once, enter)
Recommended Posts