DWalker Posted January 10, 2014 Share Posted January 10, 2014 I have an 8 button KPL that I am having issues with. It has been working for the past month but recently, it got "locked up" for lack of a better word. The light on the A button stayed on and stopped responding. The lights were flickering, not flashing, flickering. By controlling the lights off with my Ekeypad, I was able to unlock the lights and the kpl started working again. Then last night the lights were flickering again and none of the buttons were working. (I have a Lamplink on button B that also would not work.) this time the lights on the KPL buttons are also off and while I can control both my lamp on the load of the KPL and the Lamp, the KPL continues to be non-responsive. I tried to reset the link, but the linking button is also not responding. If I turn the lights on, then press the A button on the KPL, the lights flicker. Has this KPL gone bad, or is something else going on here? Link to comment
Techman Posted January 11, 2014 Share Posted January 11, 2014 I had a similar problem. First try doing a factory default reset on the KPL as that usually will correct the problem. If that doesn't fix it then you most likely have a bad KPL. I think you'll need to disable the KPL in the ISY before the reset, then after the reset do a restore device. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.