87squirrels Posted January 29, 2014 Posted January 29, 2014 I have an Outdoor ApplianceLinc that switches off as soon as I turn it on. I don't know if the module has an issue or I have a program somewhere that's turning it off as soon as it notices it on. I suspect that may be the case, as it seems to stay on longer if I turn it on from the local button (it's quite cold here, so I didn't hang around to time it). Here's a log from turning it on from the admin console, if I'm reading it right, as soon as the device reports that it's on, the ISY is turning it off: Tue 01/28/2014 09:57:01 PM : [iNST-TX-I1 ] 02 62 14 45 3A 0F 11 FF Tue 01/28/2014 09:57:01 PM : [iNST-ACK ] 02 62 14.45.3A 0F 11 FF 06 LTONRR (FF) Tue 01/28/2014 09:57:01 PM : [iNST-SRX ] 02 50 14.45.3A 0F.9F.12 27 11 FF LTONRR (FF) Tue 01/28/2014 09:57:01 PM : [std-Direct Ack] 14.45.3A-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Tue 01/28/2014 09:57:01 PM : [ 14 45 3A 1] ST 255 Tue 01/28/2014 09:57:01 PM : [iNST-TX-I1 ] 02 62 14 45 3A 0F 13 00 Tue 01/28/2014 09:57:01 PM : [iNST-ACK ] 02 62 14.45.3A 0F 13 00 06 LTOFFRR(00) Tue 01/28/2014 09:57:02 PM : [iNST-SRX ] 02 50 14.45.3A 0F.9F.12 2B 13 00 LTOFFRR(00) Tue 01/28/2014 09:57:02 PM : [std-Direct Ack] 14.45.3A-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 01/28/2014 09:57:02 PM : [ 14 45 3A 1] ST 0
LeeG Posted January 29, 2014 Posted January 29, 2014 The device is sent an On command, immediately followed by an Off command. Look for a Program that is sending an Off command.
87squirrels Posted January 30, 2014 Author Posted January 30, 2014 Thanks, I found a program normally used in summer that turns this device off when the bedroom temp is below 70; forgot that the device had a summer use (bedroom fan); in the winter it controls the heaters in our gutters. I have 95 programs... I resorted to doing a backup of the ISY and then doing grep "14 45 3A" CONF/*.PGM to find the offending program.
oberkc Posted January 30, 2014 Posted January 30, 2014 Just in case you were not aware, the ISY includes a "find and replace" feature within the programs tree. I can be used to find devices used within programs.
LeeG Posted January 30, 2014 Posted January 30, 2014 Thats great. There is Find/Replace that may have helped. Right click My Programs and select Find/Replace. That allows a search for various items including a specific device.
87squirrels Posted January 30, 2014 Author Posted January 30, 2014 Well, my day is complete - I've learned something useful today! Never realized that was there.
oberkc Posted January 30, 2014 Posted January 30, 2014 I must admit, too, that it has been a long time since I had heard "grep". Was that unix? Pretty creative.
Xathros Posted January 30, 2014 Posted January 30, 2014 I must admit, too, that it has been a long time since I had heard "grep". Was that unix? Pretty creative. Unix, Linux, BSD, OSX - pretty much anything that isn't Windows these days. -Xathros
Recommended Posts
Archived
This topic is now archived and is closed to further replies.