starhome Posted March 20, 2014 Posted March 20, 2014 I've linked a Open/Close Sensor (Triggerlinc) to my ISY and it created 2 "devices" (it shows up as a "2421 Triggerlinc v.34" while the actual device is a "2843-222") Door -Closed Door -Opened When I open the door, i briefly see the state of "Door -Opened" going from Off to On (before it switches back to Off) I'm trying to trigger a program based on this, but have been unable to do this.. Tried "Control 'Door -Opened' is switched on" "Control 'Door -Opened' is switched Fast on" "Status 'Door -Opened' is switched on" but nothing seem to trigger my program... I do see events for this device: DON 1 ST 255 DOF 1 ST 0 I assume I do something wrong and I searched the forums but have been unable to find anything about on how to get this to work... I did try to link the device with the dip switch taken off, but same results..
LeeG Posted March 20, 2014 Posted March 20, 2014 Post the Program. Right click on Program name, select Copy to Clipboard, paste to forum post. An If Control 'door Opened' is switched On should work. Make sure the Program is Enabled and not in a Folder that is False.
starhome Posted March 21, 2014 Author Posted March 21, 2014 I got it to work, I had an AND condition in the trigger. Thanks for your help!
Recommended Posts