Triggering a Scene using an Insteon OFF signal

[GuyBooth]

Can somebody please point me to an example of how to create a scene where the scene is triggered by an Insteon OFF command?

I need to set up a scene where a sensor feeding an IOLinc turns OFF thereby turning on a KPL LED as a warning.

 

I've read and watched tutorials but for some reason this is eluding me.

[LeeG]

A Scene is not defined as to what command will trigger the Scene. Not within Insteon capability. An ISY Program can be triggered with an Off command from a device and the Program issue an On command to the Scene.

 

If Control 'devicex' is switched Off

Then

Set Scene xxxx On

Else

 

where Scene xxxx has the KPL button as a Responder