pete_balkus Posted May 24, 2014 Posted May 24, 2014 I just updated my ISY994i to 4.2.2 SW and Z-wave FW 4.5.5. While I was able to re-add my Z-Wave Aeotec Range Extender to the ISY994i I can no longer get the ISY994i to see/talk with my Yale lock that is ~20ft from the ISY994i controller? Here is the procedure I am using: 1: On ISY994i UDA Console I Perform 1. Z-Wave --> Add a Z-Wave Device 2. Listening dialog box appears... 2: Procedure performed on the door lock: 1. Enter the 4-8 digit Master PIN code followed by the # key 2. Press 7 followed by the # key 3. Press 1 followed by the # key to include the door lock. 3: Check the ISY994i screen and I still see "Listening for Z-Wave Devices to add to the network". I am stumped... Any thoughts on what I can do to get my ISY994i to see my Yale Door Lock again over Z-wave? Advise/assistance appreciated... Pete
pete_balkus Posted May 24, 2014 Author Posted May 24, 2014 Issue resolved by: 1: ISY9941 - Exclude Z-Wave Device Listening... 2: Lock Cmds Master Code # 7# 3# (Remove) 3: ISY994i - Add Z-Wave Device Listening... 4: Lock Cmds Master Code # 7# 1# (Add) Back up... Pete
Recommended Posts