jdheltne Posted July 6, 2014 Share Posted July 6, 2014 I am trying to control the on/off of the water flow for my mister system on my patio. My thinking was to get a Electronic Water shutoff valve and control it via an Insteon device such as either a IO Link or an On/Off Outdoor Module via my ISY. What I am having problems with is the wiring and controlling it. I have an Smarthome Select Electronic Water Shutoff Valve 3/4" DC. With the IO Link, the wiring guide for the valve says green from value to IO Link NC red from valve to IO Link NO black from valve to 1 wire of my DC adapter 2nd wire from DC adapter to COM on IO Link When I do this, and I discover my IO Link and then configure it for: - LED on TX - Relay follow input - Momentary B and then turn the relay on or off, nothing happens on my valve. What am I missing here? Link to comment
LeeG Posted July 6, 2014 Share Posted July 6, 2014 Do not use Relay follow Input. This option has the relay being controlled by the I/O Linc Sensor. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.