mdlarussa Posted July 14, 2014 Posted July 14, 2014 I have configured my bedrooms each with a KPL and FL with four scenes (on ISY 994i) controlling fan speed (HIGH, MED, LOW, OFF) using http://forum.universal-devices.com/topic/8205-programming-fanlinc/ as a base. I now want to get the KPL's ON/OFF buttons to function as dimmers like they do in the default configuration. I can only control ramp rate and on/off. What event do I need to capture to get dimmers to work when I hold the on or off button?
apnar Posted July 14, 2014 Posted July 14, 2014 They should just work Make sure the KPL main switch and the FL light are both set to controllers in the scene for the light. Pretty much exactly how you'd setup a normal "3-way" switch setup if you're familiar with that.
Xathros Posted July 14, 2014 Posted July 14, 2014 As long as the KPL primary node is in a scene as controller with the FL Light node as responder then it should just work as you want. No program necessary. -Xathros
mdlarussa Posted July 18, 2014 Author Posted July 18, 2014 Thanks! That did it. I had scenes built for the FL_Motor, but not for the FL_Light.
Recommended Posts