Jump to content

Unable to restore 2856D2 LampLinc


hec

Recommended Posts

Posted

I am unable to restore several of my devices. I am using the ISY994 model with firmware 4.2.10.

 

Below is a 'Device Communication Log' where I initially attempted a Restore Device followed by a Write Updates. There is a phantom program running which references an old X-10 command that is no longer in use and I thought had been deleted.

 

I have run both Restore Modem and Restore ISY with an old backup. Also have rebooted multiple times and removed the power from both the ISY and the PLM.

 

Don't know what else to try . . .

 

 

 

Tue 09/16/2014 04:55:30 PM : [  13 6F DC 1] Preparing Device 'Stereo' for Restore

Tue 09/16/2014 04:55:30 PM : [  13 6F DC 1] Device 'Stereo' ready for Full Restore

Tue 09/16/2014 04:55:31 PM : [All         ] Writing 58 bytes to devices

Tue 09/16/2014 04:55:31 PM : [13 6D DE 1  ] Link    0 : 0FF8 [A2001981E3FF1F01] Writing [A2001981E3FF1F01]

Tue 09/16/2014 04:55:31 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F

Tue 09/16/2014 04:55:31 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:55:40 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F

Tue 09/16/2014 04:55:40 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:55:45 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:55:45 PM : [         X10]       C6

Tue 09/16/2014 04:55:46 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:55:46 PM : [         X10]       C6


Tue 09/16/2014 04:55:49 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F

Tue 09/16/2014 04:55:49 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:55:51 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:55:51 PM : [         X10]       C6/Off (11)


Tue 09/16/2014 04:55:55 PM : [13 6D DE 1  ] Link    0 : 0FF8 [A2001981E3FF1F01] *Failed Writing [A2001981E3FF1F01]

Tue 09/16/2014 04:55:55 PM : [D2D EVENT   ] Event [13 6D DE 1] [ERR] [1] uom=0 prec=-1

Tue 09/16/2014 04:55:55 PM : [  13 6D DE 1]      ERR   1

Tue 09/16/2014 04:56:00 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:00 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:04 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:04 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:18 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:56:18 PM : [         X10]       C6

Tue 09/16/2014 04:56:22 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:22 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:26 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:56:26 PM : [         X10]       C6

Tue 09/16/2014 04:56:31 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:31 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:36 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 0D 00

Tue 09/16/2014 04:56:36 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 0D 00 06                 (00)

Tue 09/16/2014 04:56:37 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 0D 01           (01)

Tue 09/16/2014 04:56:37 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:37 PM : [13 6F DC 0  ] Calibrating engine version

Tue 09/16/2014 04:56:37 PM : [13 6F DC 0  ] May not fully support i2, reverting to i1

Tue 09/16/2014 04:56:37 PM : [13 6F DC 1  ] Link    0 : 0FF8 [A2002B977BFF1F01] Writing [A2002B977BFF1F01]

Tue 09/16/2014 04:56:37 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F

Tue 09/16/2014 04:56:37 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:56:37 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)

Tue 09/16/2014 04:56:37 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:37 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B F8

Tue 09/16/2014 04:56:37 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B F8 06          PEEK   (F8)

Tue 09/16/2014 04:56:38 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 2B A2    PEEK   (A2)

Tue 09/16/2014 04:56:38 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:38 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F

Tue 09/16/2014 04:56:38 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:56:38 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)

Tue 09/16/2014 04:56:38 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:38 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B F9

Tue 09/16/2014 04:56:38 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B F9 06          PEEK   (F9)

Tue 09/16/2014 04:56:39 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 2B 00    PEEK   (00)

Tue 09/16/2014 04:56:39 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:39 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F

Tue 09/16/2014 04:56:39 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:56:39 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)

Tue 09/16/2014 04:56:39 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 09/16/2014 04:56:39 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B FA

Tue 09/16/2014 04:56:39 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B FA 06          PEEK   (FA)

Tue 09/16/2014 04:56:43 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:43 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:44 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:44 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:48 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:56:48 PM : [         X10]       C6

Tue 09/16/2014 04:56:52 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F

Tue 09/16/2014 04:56:52 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:56:56 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:56:56 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:56:58 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:56:58 PM : [         X10]       C6

Tue 09/16/2014 04:57:07 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:57:07 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:57:07 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F

Tue 09/16/2014 04:57:07 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)

Tue 09/16/2014 04:57:10 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:57:10 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:57:12 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:12 PM : [         X10]       C6

Tue 09/16/2014 04:57:13 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:13 PM : [         X10]       C6

Tue 09/16/2014 04:57:14 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:14 PM : [         X10]       C6

Tue 09/16/2014 04:57:15 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:15 PM : [         X10]       C6

Tue 09/16/2014 04:57:19 PM : [13 6F DC 1  ] Link    0 : 0FF8 [A2002B977BFF1F01] *Failed Writing [A2002B977BFF1F01]

Tue 09/16/2014 04:57:20 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:20 PM : [         X10]       C6

Tue 09/16/2014 04:57:33 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:57:33 PM : [         X10]       C6

Tue 09/16/2014 04:57:35 PM : [X10-RX      ] 02 52 23 80

Tue 09/16/2014 04:57:35 PM : [         X10]       C6/Off (11)

Tue 09/16/2014 04:58:02 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:58:02 PM : [         X10]       C6

Tue 09/16/2014 04:58:03 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:58:03 PM : [         X10]       C6

Tue 09/16/2014 04:58:20 PM : [X10-RX      ] 02 52 29 00

Tue 09/16/2014 04:58:20 PM : [         X10]       C6
 

Posted

Device 13.6D.DE is not responding to commands at all (no 02 50 ..... responses from device)

 

 

Tue 09/16/2014 04:55:31 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F
Tue 09/16/2014 04:55:31 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:55:40 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F
Tue 09/16/2014 04:55:40 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:55:45 PM : [X10-RX      ] 02 52 29 00
Tue 09/16/2014 04:55:45 PM : [         X10]       C6
Tue 09/16/2014 04:55:46 PM : [X10-RX      ] 02 52 29 00
Tue 09/16/2014 04:55:46 PM : [         X10]       C6

Tue 09/16/2014 04:55:49 PM : [iNST-TX-I1  ] 02 62 13 6D DE 0F 28 0F
Tue 09/16/2014 04:55:49 PM : [iNST-ACK    ] 02 62 13.6D.DE 0F 28 0F 06          SET-MSB(0F)

 

 

 

Device 13.6F.DC communication was fine until flood of X10 traffic interfered.

 

 

Tue 09/16/2014 04:56:36 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 0D 00

Tue 09/16/2014 04:56:36 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 0D 00 06                 (00)
Tue 09/16/2014 04:56:37 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 0D 01           (01)
Tue 09/16/2014 04:56:37 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:37 PM : [13 6F DC 0  ] Calibrating engine version
Tue 09/16/2014 04:56:37 PM : [13 6F DC 0  ] May not fully support i2, reverting to i1
Tue 09/16/2014 04:56:37 PM : [13 6F DC 1  ] Link    0 : 0FF8 [A2002B977BFF1F01] Writing [A2002B977BFF1F01]
Tue 09/16/2014 04:56:37 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F
Tue 09/16/2014 04:56:37 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:56:37 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)
Tue 09/16/2014 04:56:37 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:37 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B F8
Tue 09/16/2014 04:56:37 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B F8 06          PEEK   (F8)
Tue 09/16/2014 04:56:38 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 2B A2    PEEK   (A2)
Tue 09/16/2014 04:56:38 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:38 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F
Tue 09/16/2014 04:56:38 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:56:38 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)
Tue 09/16/2014 04:56:38 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:38 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B F9
Tue 09/16/2014 04:56:38 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B F9 06          PEEK   (F9)
Tue 09/16/2014 04:56:39 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 2B 00    PEEK   (00)
Tue 09/16/2014 04:56:39 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:39 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F
Tue 09/16/2014 04:56:39 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:56:39 PM : [iNST-SRX    ] 02 50 13.6F.DC 2B.97.7B 2B 28 0F    SET-MSB(0F)
Tue 09/16/2014 04:56:39 PM : [std-Direct Ack] 13.6F.DC-->ISY/PLM Group=0, Max Hops=3, Hops Left=2
Tue 09/16/2014 04:56:39 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 2B FA
Tue 09/16/2014 04:56:39 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 2B FA 06          PEEK   (FA)

Tue 09/16/2014 04:56:43 PM : [X10-RX      ] 02 52 23 80
Tue 09/16/2014 04:56:43 PM : [         X10]       C6/Off (11)
Tue 09/16/2014 04:56:44 PM : [X10-RX      ] 02 52 23 80
Tue 09/16/2014 04:56:44 PM : [         X10]       C6/Off (11)
Tue 09/16/2014 04:56:48 PM : [X10-RX      ] 02 52 29 00
Tue 09/16/2014 04:56:48 PM : [         X10]       C6
Tue 09/16/2014 04:56:52 PM : [iNST-TX-I1  ] 02 62 13 6F DC 0F 28 0F
Tue 09/16/2014 04:56:52 PM : [iNST-ACK    ] 02 62 13.6F.DC 0F 28 0F 06          SET-MSB(0F)
Tue 09/16/2014 04:56:56 PM : [X10-RX      ] 02 52 23 80
Tue 09/16/2014 04:56:56 PM : [         X10]       C6/Off (11)
Tue 09/16/2014 04:56:58 PM : [X10-RX      ] 02 52 29 00
Tue 09/16/2014 04:56:58 PM : [         X10]       C6
Tue 09/16/2014 04:57:07 PM : [X10-RX      ] 02 52 23 80

Posted

Should have noted this in previous post.   The X10 traffic is NOT coming from a Program (NOT sent from PLM).   There would be 02 63 ....... traffic if the X10 messages originated in the PLM.  Some other device is sending the X10 C6 messages.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...