Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

RemoteLinc All On/Off

Featured Replies

Posted

It's possible to manually link the RemoteLinc All On/All Off buttons as a device controller apart from those devices linked to the buttons. Specifically, the linked device(s) respond to all On or All Off, but not to any individual button.

 

Is there a way to do that using an ISY? If not, then is there any problem with manually linking that button pair?

"Is there a way to do that using an ISY?"

No.

 

"If not, then is there any problem with manually linking that button pair?"

The expected versus actual link tables will not match making a Restore Device impossible for both the RemoteLinc and any manually linked device.

 

Also it will be necessary to analyze the link tables to see what devices are affected be those buttons.

Edited by LeeG

I have tested an original Remotelinc with the All On and Off buttons.

I have linked the All buttons manually to an Insteon module.

 

As LeeG pointed out. The ISY controller will not know about the manual link. In my case a Link Database compare results in mismatched links.

Thanks Brian.  I was not aware that linking was even possible until Stu raised the question.  I found the same results you did.

  • Author

So, basically not a problem :?

 

BTW, HL is also unaware of this link.

Running the ISY with manual links is not a good idea.

  • Author

I agree. But if the only concern, in this particular case, is that I can't restore the device from an ISY record, then I'm OK with that. It's not difficult to rebuild any scenes and if the RemoteLinc fails, there's no direct replacement, so I'd be starting over anyway.

 

BTW, we use seven of these. I'd sure like to see a larger replacement than the Mini Remote.

  • Author

Sometimes the simplest solutions are the most evasive. The solution is a program that senses IF all the devices linked to the RemoteLinc are turned off and THEN turns off the other specified devices. What's even better for us in this situation is that All On has no effect on those additional devices.

Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.