dzarn Posted October 7, 2014 Posted October 7, 2014 Is there a maximum length for the cable between the ISY & PLM? I'm using a 2413S, the ISY has its own power supply. Thanks!
LeeG Posted October 7, 2014 Posted October 7, 2014 (edited) The PLM guide says 10' max with 6' or less recommended. From the guide "Do not use a serial cable longer than 10’ (6’ or less is recommended)" Edited October 7, 2014 by LeeG
builderb Posted October 7, 2014 Posted October 7, 2014 I've got mine going through about 15' of cat6 cable, 2 keystone jacks, and a 12" patch cable on each end. Hasn't been a problem.
Recommended Posts