Aeon Labs Minimote Support

[Scyto]

I noticed when I added the minimote the 4 buttons are not seen / used.

Is this something that will have to wait for multi channel support?

 

Sun 02/15/2015 18:43:58 : Listening for Z-Wave devices to add to the network
Sun 02/15/2015 18:44:01 : Z-Wave device detected, retrieving info 2
Sun 02/15/2015 18:44:01 : Z-Wave device detected, retrieving info 4
Sun 02/15/2015 18:44:02 : Z-Wave device detected, retrieving info 5
Sun 02/15/2015 18:44:03 : Adding Z-Wave devices stopped
Sun 02/15/2015 18:44:04 : Device 16 of type 1.1.1 included into Z-Wave network
Sun 02/15/2015 18:44:04 : Adding ISY node(s) for new Z-Wave device 16 type 1.1.1
Sun 02/15/2015 18:44:04 : [ZWAVE-ADD-NODE  ] Add device: mfg 0086.0001.0003, basic=0x01 gen=0x01 spec=0x01
Sun 02/15/2015 18:44:10 : [ZWAVE-WAKEUP  16] Awake with no pending work, put back to sleep ZW016_1
Sun 02/15/2015 18:44:12 : [ZWAVE-WAKEUP  16] Awake with no pending work, put back to sleep ZW016_1
Sun 02/15/2015 18:44:14 : [ZWAVE-WAKEUP  16] Awake with no pending work, put back to sleep ZW016_1
Sun 02/15/2015 18:48:07 : [VAR  2   10 ]       1
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ] ----------------------------------------------
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ] ZW016_1 uid=16 type=1.1.1 mid=134 tid=1 pid=3 model=0
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x86  V0  VERSION
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x72  V1  MANUFACTURER_SPECIFIC
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x70  V1  CONFIGURATION
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x9B  V0  ASSOCIATION_COMMAND_CONFIGURATION
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  xEF  V0  MARK
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x85  V0  ASSOCIATION
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x2B  V0  SCENE_ACTIVATION
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]    -  x26  V0  SWITCH_MULTILEVEL
Sun 02/15/2015 18:48:11 : [ZW-SHOW         ]
Sun 02/15/2015 18:48:12 : [ZW-SHOW         ] Node  16 - ZW 016 Remote Control has the following neighbors
Sun 02/15/2015 18:48:12 : [ZW-SHOW         ]    No Neighbors
Sun 02/15/2015 18:48:12 : [ZW-SHOW         ]
Sun 02/15/2015 18:48:12 : [ZW-SHOW         ] Node  16 - ZW 016 Remote Control does not support associations
 

[MWareman]

Is this something that will have to wait for multi channel support?

 

Yes. Waiting for this myself as well... For this (and other) devices.