cowboyzx6 Posted March 14, 2015 Posted March 14, 2015 I have added device (2476D) 18.1E.CB as a controller to scene "Landing New". I am able to control the load (a group of ceiling lights) via the device itself. In the console, when I click on the individual device, I am able to turn it on and off. However, when I try to click any of the buttons at the scene level, nothing happens. Including recent log below. Not sure if it matters, but I did try to cross link this switch with another 2476D and I couldn't. But, thought I would tackle one problem at a time. Sat 03/14/2015 11:51:55 AM : [iNST-TX-I1 ] 02 62 00 00 10 CF 11 00 Sat 03/14/2015 11:51:55 AM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 03/14/2015 11:51:59 AM : [iNST-TX-I1 ] 02 62 00 00 10 CF 13 00 Sat 03/14/2015 11:51:59 AM : [iNST-ACK ] 02 62 00.00.10 CF 13 00 06 LTOFFRR(00) Sat 03/14/2015 11:51:59 AM : [D2D EVENT ] Event [18 1E CB 1] [sT] [0] uom=0 prec=-1 Sat 03/14/2015 11:51:59 AM : [ 18 1E CB 1] ST 0 Sat 03/14/2015 11:52:36 AM : [iNST-TX-I1 ] 02 62 18 1E CB 0F 11 CC Sat 03/14/2015 11:52:36 AM : [iNST-ACK ] 02 62 18.1E.CB 0F 11 CC 06 LTONRR (CC) Sat 03/14/2015 11:52:36 AM : [iNST-SRX ] 02 50 18.1E.CB 22.FF.0E 2B 11 CC LTONRR (CC) Sat 03/14/2015 11:52:36 AM : [std-Direct Ack] 18.1E.CB-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 03/14/2015 11:52:36 AM : [D2D EVENT ] Event [18 1E CB 1] [sT] [204] uom=0 prec=-1 Sat 03/14/2015 11:52:36 AM : [ 18 1E CB 1] ST 204 Sat 03/14/2015 11:52:39 AM : [iNST-TX-I1 ] 02 62 18 1E CB 0F 13 00 Sat 03/14/2015 11:52:39 AM : [iNST-ACK ] 02 62 18.1E.CB 0F 13 00 06 LTOFFRR(00) Sat 03/14/2015 11:52:39 AM : [iNST-SRX ] 02 50 18.1E.CB 22.FF.0E 2B 13 00 LTOFFRR(00) Sat 03/14/2015 11:52:39 AM : [std-Direct Ack] 18.1E.CB-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 03/14/2015 11:52:39 AM : [D2D EVENT ] Event [18 1E CB 1] [sT] [0] uom=0 prec=-1 Sat 03/14/2015 11:52:39 AM : [ 18 1E CB 1] ST 0
LeeG Posted March 14, 2015 Posted March 14, 2015 Was the cross-link attempt done with an ISY Scene or done manually? Run Show Device Links Table on 18.1E.CB and post the Show display.
cowboyzx6 Posted March 14, 2015 Author Posted March 14, 2015 The cross-link was done through ISY Is this what you wanted to see? And after clicking the Compare button:
LeeG Posted March 14, 2015 Posted March 14, 2015 The device is missing all the Scene link records. None of the Scenes will work nor will the ISY be aware of the device being turned On/Off. Do a Restore Device to rebuild the link database.
cowboyzx6 Posted March 14, 2015 Author Posted March 14, 2015 It worked! What an education I am getting today! Thanks again.
LeeG Posted March 14, 2015 Posted March 14, 2015 Glad to help. It looks like the PLM was replaced at some point. Was the old PLM 18.D0.7F? If so the Restore Device may have written link records with the old PLM address.
LeeG Posted March 14, 2015 Posted March 14, 2015 Also note that if things are working now but not last night you may have other sources of interference that are On only at night.
cowboyzx6 Posted March 14, 2015 Author Posted March 14, 2015 Glad to help. It looks like the PLM was replaced at some point. Was the old PLM 18.D0.7F? If so the Restore Device may have written link records with the old PLM address. Yes, I did replace several months ago. Don't recall the old ID. Weird that I didn't notice any problems till recently. Also note that if things are working now but not last night you may have other sources of interference that are On only at night. Great point...I will keep an eye on it tonight when my "Evening" program runs!
cowboyzx6 Posted March 14, 2015 Author Posted March 14, 2015 Is there a best practice to "clean up" anything related to the old PLM?
LeeG Posted March 14, 2015 Posted March 14, 2015 Without knowing the old PLM address I would take no further action.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.