6-Button Keypadlinc Shows up as 5-button device

[JoelW]

I have two 6-button keypadlinc keypads and they show up as 5 buttons in the ISY.

 

Not sure why or what to do? I'd like to program all 6 buttons - ON, OFF, A, B, C, D.

 

When the ISY found and created these devices, it created .1, .A, .B, .C, .D. I am guessing that the .1 is the on button and I am using the A-D buttons. How do I access the OFF button?

[LeeG]

The ON/OFF buttons use the same node.  Pressing the ON button sends an On command to node 1, pressing the OFF button sends an Off command to node 1.  

[stusviews]

Using programs (do not use the On/Off buttons a a scene controller):

 

If

     Control 'device' is Switched On

 

Then

     do what you want

 

and

 

If

     Control 'device' is Switched Off

 

Then

     do what you want

 

--------------------------------------------------------------------------------------

Using scenes:

 

1. Change the mode to 8-button, use the 6-button frame and buttons. The ISY will see the buttons as A through H.

2. Make both A & B the controller of any scene

3. Make both G & H the controller of any scene

4. Buttons labelled A, B, C, and D will actually be buttons C, D, E, and F

[JoelW]

Got it! Thanks All!