andrew77 Posted September 14, 2015 Posted September 14, 2015 Hi guys; I have an older Lamplinc 2456D3 and was wanting to get another one but I can't seem to find it on the smart home site. I see a few 2 prong models but nothing with a ground pin. Am i looking in the wrong spot? Drew
Techman Posted September 14, 2015 Posted September 14, 2015 The newer models are only two prong. If you don't need a dimmer you could use the three prong on/off module
stusviews Posted September 14, 2015 Posted September 14, 2015 Dimmable lamps are nearly always wired using a polarized 2-pin plug,
Teken Posted September 14, 2015 Posted September 14, 2015 I think this is a good compromise plus it removes the whole wall wart issue: http://www.smarthome.com/outletlinc-dimmer-insteon-2472dwh-remote-control-outlet-dual-band-white.html
Brian H Posted September 14, 2015 Posted September 14, 2015 The 2456D3 has been discontinued for a long time now. 2457D2 Dual Band is the replacement.
Recommended Posts