rpsa Posted December 10, 2015 Share Posted December 10, 2015 Can a 6 button Keypad Dimmer be changed to an 8 button Keypad Dimmer? Or, can ONLY a KeypadLInk (switch, no dimmer) undergo the 6/8 button transformation? I know an 8 button Keypad dimmer is sold. But, if I can convert an existing 6 button dimmer it would be easier. Thanks. Bob S. Link to comment
LeeG Posted December 10, 2015 Share Posted December 10, 2015 Yes. A 6 button dimmer can be configured as 8 button and visa versa. It has to be done manually using procedure in KPL User Guide. If currently defined to the ISY, delete the KPL, change the button configuration and add the KPL back. Link to comment
rpsa Posted December 10, 2015 Author Share Posted December 10, 2015 Yes. A 6 button dimmer can be configured as 8 button and visa versa. It has to be done manually using procedure in KPL User Guide. If currently defined to the ISY, delete the KPL, change the button configuration and add the KPL back. Thanks. Link to comment
Brian H Posted December 10, 2015 Share Posted December 10, 2015 Smarthome sells a eight button face plate and button set. For the conversion. http://www.smarthome.com/insteon-2401wh8-8-button-change-kit-for-keypadlinc-white.html Link to comment
stusviews Posted December 10, 2015 Share Posted December 10, 2015 Using the six button face plate with a KPL in 8-button mode results in a five device Keypad (link A & B and G & H) Link to comment
mwester Posted December 11, 2015 Share Posted December 11, 2015 Using the six button face plate with a KPL in 8-button mode results in a five device Keypad (link A & B and G & H) i've converted several using this trick (after stusviews mentioned this in an earlier thread) -- very nice, and more intuitive to use. I use the bottom double button as an "all off", and control the main lighting for the area in question from the top double button. Definite improvement in the WAF. Link to comment
stusviews Posted December 11, 2015 Share Posted December 11, 2015 By using combinations of large and small buttons, I've made 3, 4, 6, and 7 device KPLs. BTW, I actually mean 6-device, not 5-device in my previous post Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.