hart2hart Posted December 12, 2015 Share Posted December 12, 2015 I've got 2 of them. They see Insteon commands for on/off by seeing LED go on and off but relay does not activate. They see that sensor has been closed by LED but do not send Insteon. Anyone fix these? For postage I'll give away. Link to comment
hart2hart Posted January 8, 2016 Author Share Posted January 8, 2016 Okay. No one wants them . Just curious ... are bad capacitors likely culprit here? I might fix one to just to see if possible but wouldn't use it for fear of issues if device ever resulted in insurance claim -- Regardless of underlying cause. Link to comment
stusviews Posted January 8, 2016 Share Posted January 8, 2016 Does the relay close if you send a direct command to the relay. Link to comment
Brian H Posted January 9, 2016 Share Posted January 9, 2016 Symptoms indicate a hardware failure. Relay On/Off LED changing state but the relay not working. Could be a defective relay or circuit driving it. Sensor LED On/Off but no detected change sent back.. Also sounds like a hardware failure. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.