Birdman11 Posted December 26, 2015 Share Posted December 26, 2015 I am using DSClink and Evl-3 and all is working very well. I would like to be able to see from my Mobilinc Dashboard the status of my alarm system (armed stay,armed away,not armed). I have all applicable state variables set up in ISY and the command codes working well in the Network Resource Module. I have created Run Only programs to activate the command via the dashboard and they also work well. Anyway to see the alarm status on the Dashboard? Thanks in advance Link to comment Share on other sites More sharing options...
InsteonNut Posted December 27, 2015 Share Posted December 27, 2015 Hi Birdman11, For Alarm status you could write a program that toggled between TRUE and FALSE based on alarm status. IE TRUE == Armed and FALSE == DISARMED. Then in MobiLinc go to that programs advanced options and change the status names from True/False to Armed/Disarmed and add the program to the dashboard for a quick glance to see the alarm status. Wes Link to comment Share on other sites More sharing options...
Birdman11 Posted December 27, 2015 Author Share Posted December 27, 2015 Thanks Wes for your reply during this holiday season. Tried it and it woks GREAT. Thank Again. Dan Link to comment Share on other sites More sharing options...
InsteonNut Posted December 28, 2015 Share Posted December 28, 2015 Great! Thanks Dan! Happy Holidays, Wes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.