Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Is Switchlinc Toast?

Featured Replies

Posted

This question has to do with a problem I observed with a 2476D SwitchLinc Dimmer W/Beeper v.40. It was continuously writing as I observed it on the Administration Console.  I monitored with the Event Monitor using level 3. Below is some of the monitor's text in which it gave the following "Failed Writing" error:

Sun 01/10/2016 06:49:14 AM : [iNST-TX-I1  ] 02 62 1B AB AF 0F 28 0F

Sun 01/10/2016 06:49:14 AM : [iNST-ACK    ] 02 62 1B.AB.AF 0F 28 0F 06          SET-MSB(0F)

Sun 01/10/2016 06:49:18 AM : [1B AB AF 1  ] Link    8 : 0FB8 [A22D1E49614C1E01] *Failed Writing [............1E..]

Sun 01/10/2016 06:50:02 AM : [1B AB AF 1  ] Link    8 : 0FB8 [A22D1E49614C1E01] Writing [............1E..]

Sun 01/10/2016 06:50:02 AM : [iNST-TX-I1  ] 02 62 1B AB AF 0F 28 0F

Sun 01/10/2016 06:50:02 AM : [iNST-ACK    ] 02 62 1B.AB.AF 0F 28 0F 06          SET-MSB(0F)

Sun 01/10/2016 06:50:11 AM : [iNST-TX-I1  ] 02 62 1B AB AF 0F 28 0F

Sun 01/10/2016 06:50:11 AM : [iNST-ACK    ] 02 62 1B.AB.AF 0F 28 0F 06          SET-MSB(0F)

Sun 01/10/2016 06:50:20 AM : [iNST-TX-I1  ] 02 62 1B AB AF 0F 28 0F

Sun 01/10/2016 06:50:20 AM : [iNST-ACK    ] 02 62 1B.AB.AF 0F 28 0F 06          SET-MSB(0F)

Sun 01/10/2016 06:50:24 AM : [1B AB AF 1  ] Link    8 : 0FB8 [A22D1E49614C1E01] *Failed Writing [............1E..]

 

I then checked the SwitchLinc's device links table and it would not respond with any links.

See Image 1 or http://screencast.com/t/mWx8GPcTfK

 

Figuring this was an unsolvable issue I decided to delete and re-add the SwitchLinc. The delete went find but when I tried to re-add it. It produced another "Failed Writing" error: 

See Image 2 or http://screencast.com/t/nCGzX0OKU1IB

 

I even did a factory re-set on the SwitchLinc and tried to re-add it but got the same error. The last time I tried it I got the following error:

See Image 3 or http://screencast.com/t/qNlEAbsw

 

Can I assume this device is toast?

 

If not, what else could I try?

 

Thanks,

 

Steve

post-1327-0-01745000-1452446038_thumb.jpg

post-1327-0-67047300-1452446052_thumb.jpg

post-1327-0-70397300-1452446060_thumb.jpg

Would need to see Event Viewer at LEVEL 3 of each failure to be sure.  The posted trace shows no device response to the four attempts to get a Set-MSB command to respond.

 

I would put device on extension cord and plug into PLM location and event trace trying to add device.  Posted trace could indicate a comm issue or a failed device.

Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.